Manually Setting The Time And The Date; Setting The Time - Citizen H486 User Manual

Manually Setting the Time and the Date

10. Setting the Time

When using the watch in an environment where radio signals cannot be received, manually
adjust the time and the date.
• After pulling out the crown to position 2, press button (A) to repeatedly change between
[Second Hand/Minute Hand] adjustment and [Hour Hand/Date] adjustment.
Step 1: Pull out the crown to position 2.
• The second hand will stop at the 0 second position.
Step 2: Turn the crown to set the minute hand.
(1) Turn clockwise by 1 click to rotate the second
hand clockwise once and to move the minute hand
ahead by 1 minute.
(2) Turn counterclockwise by 1 click to rotate the
second hand counterclockwise once and to move
the minute hand back by 1 minute.
• Continuously turn the crown by 2 or more clicks to
make the second and minute hands move continuously.
Turn the crown by one click clockwise or counterclockwise to stop the continuous
movement of the hands.
158
Step 3: Press button (A) once to enter the hour hand/date
adjustment mode.
(1) Rotate the crown clockwise by one click to
move the hour hand ahead by 1 hour.
(2) Rotate the crown counterclockwise by one
click to move the hour hand back by 1 hour.
• Turn the crown by two or more clicks to make
the hour hand move continuously.
(3) The hour hand and the date are linked together.
Move the hour hand continuously to change the
date.
Crown in
position 2 NOTE:
The date changes at midnight. Pay close attention to a.m.
and p.m. when setting the date.
Step 4: Set the time by using a time signal, and then press the crown back into its normal
position.
Button (A)
159