Charge The Battery - Nokia 2710 User Manual

You can remove or replace the memory card during
phone operation without switching the device off,
but you need to ensure that no application is
currently accessing the memory card.

Charge the battery

Your battery has been partially charged at the
factory. If the device indicates a low charge, do the
following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full charge,
disconnect the charger from the device, then
from the wall outlet.
You do not need to charge the battery for a specific
length of time, and you can use the device while it
is charging. If the battery is completely discharged,
it may take several minutes before the charging
© 2010 Nokia. All rights reserved.
Get started 11