Configuration2 Menu - Panasonic TH-47LFV5W Operating Instructions Manual

3. Press [ ] or [ ] button to select the schedule:
POWER-ON schedule: Press [
1
set the hour and minute for this Display to turn on.
POWER-OFF schedule: Press [
2
set the hour and minute for this Display to turn off.
Select or leave an empty "__" for both the hour and minute
slot if you do not want to use this power-on or power-off
schedule.
INPUT-SOURCE selection: Press [
3
to select an input source. If no input source is
selected, the input source will remain the same as
last selected.
DATE schedule: Press [ ] button to select which
4
day in a week this schedule item will be take effect,
and then press the [SET] button.
4. For more schedule settings, press [EXIT] button and then
repeat the steps above. A check mark in the box next
to the number of the schedule item indicates that the
selected schedule is in effect.
NOTES:
• The {EVERY DAY} selection in a schedule item takes
priority over the other weekly schedules.
• If the schedule overlap, the scheduled power-on time
takes priority over scheduled power-off time.
• If there are two schedule items programmed for the same
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set this Display
to power on at 7:00 AM and off at 5:00 PM, then only
schedule item # 1 will take effect.
DATE AND TIME
Adjust the current date and time for this Display's internal
clock.
DATE AND TIME
YEAR
MONTH
DAY
HOUR
MINUTE
DAYLIGHT SAVING TIME
CURRENT DATE TIME
2011.01.01
:SEL +-:ADJ
EXIT
1. Press [SET] button to enter the submenu.
2. Press [ ] or [ ] button to toggle among the {YEAR},
{MONTH}, {DAY}, {HOUR}, {MINUTE}, and {DAYLIGHT
SAVING TIME} settings.
3. Press [ ] or [ ] button to adjust all settings except
{DAYLIGHT SAVING TIME}.
CONFIGURATION1 RESET
Reset all settings in the CONFIGURATION1 menu to factory
preset values.
26
] or [ ] button to
] or [ ] button to
] or [
2012
08
04
20
20
OFF
00:00:00
:RETURN :EXIT MENU
MENU

CONFIGURATION2 menu

CONFIGURATION2
LANGUAGE
OSD TURN OFF
OSD H POSITION
OSD V POSITION
INFORMATION OSD
1
MONITOR INFORMATION
MONITOR ID
2
] button
IR CONTROL
TILING
2
POWER ON DELAY
CONFIGURATION2 RESET
3
:SEL
LANGUAGE
Select the language used in the OSD menu.
The options are: {
{ } / {
{ }.
OSD TURN OFF
Set the period of time the OSD menu and "No Signal" stays
on the screen.
The options are: {5 ~ 120} seconds.
OSD H POSITION
Adjust the horizontal position of the OSD menu.
OSD V POSITION
Adjust the vertical position of the OSD menu.
INFORMATION OSD
Set the period of time the information OSD displayed on the
upper right corner of the screen. The information OSD will
display when input signal is changed.
The information OSD will not appear on the screen with {OFF}
selection.
The options are: {OFF, 3 SEC. ~ 10 SEC.}.
MONITOR INFORMATION
Displays the information about your display, including MODEL
NAME and SERIAL.
MONITOR ID
Set the ID number for controlling this Display via the RS232C
connection or by ID Remote Control. Each display must have
a unique ID number when multiple sets of this Display are
connected.
IR CONTROL
Select the operation mode of the remote control unit.
• {NORMAL} - All displays can be operated normally by the
remote control.
• {LOCK} - Lock the remote control function of this Display.
To unlock, press and hold the [RECALL] button on the
remote control for 5 (five) seconds.
:NEXT :RETURN
SET EXIT
} / { } / {
} / { } / {
ENGLISH
45
50
50
3 SEC.
1
OFF
:EXIT MENU
MENU
} /
} / { } /