Table of Contents
Advertisement
5.5.4 Tips on configuring your Dial-Up Network
After you setup the ISDN TA driver completely. The next step is going to have your Dial-Up
network working. Following tips will guide you how to configure your Dial-Up Network
with Windows 98SE/Me/2000
Click the 'Make New
2.
Connection' icon
twice to create a connection
Note! If you use ML PPP 128K driver then TCP/IP header compression has to be off
And DNS -values has to be set up correctly in TCP/IP properties.
D-LINK ISDN TA DMI-128ESU+
1) Ensure that you have
1.
installed Dialup server and
Dial-Up Networking in
your windows
environment (Win 98SE).
2) In Win NT ensure that
RAS (Remote Access
Server) is installed.
3) Choose Dial-Up
Network icon from 'My
Computer' window.
.
Choose a protocol for
3.
ISDN TA and give a
name for this connection
and press 'Next' button.
25
Advertisement
Table of Contents
