Control Panels; Numeric Entry - RCA guide plus User Manual

Features and menus

Control Panels

Control Panels allow you to adjust the default settings on many features
of your TV. You can choose a setting, enter a number, or adjust a level
such as tint or brightness. There are three types of control panels: sliders,
choice lists, and numeric entry.
Sliders
Sliders are used to make adjustments to a particular control.
To use a Slider in a menu:
1. Press the up or down arrow to select the slider control for the
feature you want to adjust.
2. Press the right or left arrow to adjust the indicator line on the slider.
PICTURE CONTROLS
Contrast
Color
Tint
Black Level
Sharpness
Press MENU to exit.

Numeric Entry

A numeric entry control panel is used to enter numbers or letters.
A pointer appears underneath the column you are changing.
SET TIME
:
Enter 01 to 12 for the hour.
Press MENU to exit.
1. Press the up arrow to enter a number in the column above the
pointer.
2. Press the right arrow to move to the next column, then press the up
or down arrow to enter a number.
3. When you have finished entering information, press MENU or OK.
AM
Pointer
ON OFF
VCR1
DVD VCR2 AUX
MUTE
SOUND GO BACK
GUIDE
OK
Arrows
MENU
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP
CH CTRL
PIP SWAP
If the control panel is not set at the
current time, use the left arrow to go back
over the columns and the up arrow to
make changes.
You can also enter numbers directly by
using the number buttons.
TV
SAT•CABLE
SKIP
INFO
CLEAR
PAUSE
RESET
29