Table of Contents
Advertisement
Troubleshooting
Problem
The flash is stuck in the camera hot shoe.
The flash is turned on but won't fire.
The edges of images look dark.
There's a whining sound coming from the flash.
Customer Service
For customer service, please go to www.boltflashes.com.
Solution
Make sure that the mounting foot lock is released.
Make sure that fresh batteries are installed and in
the proper orientation.
Your lens angle of view is wider than the flash angle
of coverage. Use a lens with a longer focal length.
This is normal and does not indicate a malfunction.
When the flash becomes warm from continuous
use, vibrations inside the unit may cause this sound.
It will dissipate as the unit cools.
|
Troubleshooting
21
Advertisement
Table of Contents
