Related Manuals for ClearOne AP IR Remote Control
Summary of Contents for ClearOne AP IR Remote Control
- Page 1 AP IR Remote Control Installation & Operation Manual ClearOne Communications, Inc. ~ 1825 Research Way, Salt Lake City, UT 84119 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107...
-
Page 2: Table Of Contents
We welcome and encourage your comments so we can con- To Customize Your AP IR Remote Control System ......12 tinue to improve our products and serve your needs. -
Page 3: Product Registration
+49 911 955159-10 E-mail: global@clearone.com Product Registration Please register your AP IR Remote Control online in the Product section at www.clearone.com. When your product is properly registered, ClearOne Figure 2. AP IR Remote Control receiver Communications is better able to serve you should you require technical assistance. -
Page 4: Programmable Functions
Programmable Functions The AP IR transmitter is used to program and operate the AP systems and GT1524. Your AP IR Remote Control System is designed to operate right out of the box; The buttons functions are described in Figure 4, below. -
Page 5: Speed Dial
To program mute commands Speed Dial 1. Press and hold the Program button until the The AP IR Remote Control System can store up to ten speed dial numbers for use LEDs in the receiver flash. All Mics Channel 1 with AP and GT1524 telephone devices. -
Page 6: Volume Control
Programmable Functions Programmable Functions To store a command to mute Output D on AP400 unit 0 in location 3, enter: Volume control examples To adjust volume of Output D on all units with a nominal level of 0 and store it in MUTE ON PROGRAM location 0 (default), enter:... -
Page 7: Hook Flash (Ap400 And Gt1524 Only)
WXYZ AP IR Remote Default Settings To End a Call The AP IR Remote Control System comes pre-programmed with default settings for VOLUME • Press the Off (red) button. The In Use LED extin- all of the button functions. You can restore the default settings at anytime. Please... -
Page 8: To Access Features From A Pbx
Follow the instructions beginning on page 5 to customize your AP IR Remote Warranty Control System to fit your specific conferencing needs. ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Conference Call Button Manufacturer agrees, at its option, to: This button does not currently support any functions. -
Page 9: Compliance
Changes or modifications not expressly approved by ClearOne Communications, Inc. could void the user’s authority to operate the equipment. Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760...
Need help?
Do you have a question about the AP IR Remote Control and is the answer not in the manual?
Questions and answers