CORDLESS PHONE WITH DECT TECHNOLOGY Model Number: HE413002B INSTRUCTION MANUAL After Sales Support Telephone: 1300 663 907 Internet: www.winplus.com.au...
1. Safety Warnings & Cautions - Keep Cordless DECT Phone away from liquid - Keep away from heat sources such as heaters and ovens - If the Cordless DECT Phone is not to be used for long periods of time, turn off and unplug from any power source - Do not use in dusty conditions - Do not drop or jar the Cordless DECT Phone.
Introduction Congratulations on the purchase of your Cocoon Cordless DECT Phone. This product is designed to let you keep in touch throughout your home or office and provide many years of reliable use. Please read and follow these instructions carefully. If you experience any difficulties setting up or using this product, please see back page for customer support contact details.
Instructions INSTALLATION AND SETUP After choosing where you would like to position the phone handset, unpack the contents of the box and check that you have all the items listed on page 4. Remove back cover and insert batteries Connect the supplied telephone cable into the base unit. Connect the other end to the live telephone point in your home or office.
Instructions Changing the Handset Name Press the Menu button to enter the main menu Press the Navigation buttons to select Personal Set and press the OK button to select. Press the Navigation button to select Handset Name and then press the OK button to select.
Press the Mute button again to unmute the microphone. LOCATING HANDSETS The Cocoon Cordless DECT Phone comes with a paging function to allow you to locate a missing handset. Press the Handset Locator button on the rear of the base station. All the handsets registered to the base station will begin to ring.
Page 9
Instructions Tip: Instead of pressing the Navigation key to browse the phone book entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, and so on.
Instructions DIRECT DIAL BUTTONS The Cocoon Cordless DECT Phone has 2 direct dial buttons (keypad buttons 1 & 2) in addition to the phone book entries. A long press on the key will automatically dial the stored phone number. Add/Edit Direct Dial Numbers...
Instructions REDIAL LIST The redial list stores the last 5 numbers dialled. A maximum of 24 digits is displayed for each entry in the list. Accessing the Redial List Press the Redial button to enter the redial list. The last dialled number will be displayed first.
Instructions INTERCOM FUNCTIONS The intercom, call transfer and conference functions can only be used when there are 2 or more handsets registered to the same base station. See page 16 for deatils. Note: If you try to make a call while another handset is already on an external call, you’ll hear a busy tone for a few seconds before the display returns to idle.
HANDSET TONE Setting Ring Tone Volume The Cocoon Cordless DECT Phone has 5 ring tone levels – Off, Level 1, Level 2, Level 3 and Level 4. By default the handset will be on level 2. Press the Menu button to enter the main menu Press the Navigation button to select Personal Set and press the OK button to select.
Instructions Enable/Disable Auto Hang-Up With this feature enabled, a phone call can be ended by simply placing the handset back on the base unit. Press the Menu button to enter the main menu Press the Navigation button to select Personal Set and press the OK button to select.
Instructions Set Alarm Press the Menu button to enter the main menu Press the Navigation buttons to select Clock&Alarm and press the OK button to select. Press the Navigation button to select Alarm and then press the OK button to select. Press the Navigation button to select Off, On Once or On Daily and then press the OK button to select Enter the time for the alarm in HH:MM and use the Up/Down button to...
Page 16
Registering a New Handset By default the phone handsets are registered to the base unit they came with. You can follow these instructions to add extra Cocoon DECT Phone handsets onto a set. On the base station, press the Handset Locator button for 5 seconds.
- Make sure you are using the telephone line cable supplied with your Cocoon Cordless DECT Phone. Other telephone line cables might not work. - Move the handset closer to the base unit.
Page 18
Troubleshooting Problem Solution The Caller ID feature isn’t - You need to subscribe to the Caller Display feature working from your network service provider - The caller may have withheld their number When I try to make a call, I hear - Check another handset is not already in use busy tone - The number you are trying to call may be busy...
This product is warranted against defects for a period of One year If the product is faulty, Winplus will repair or replace the product (at its discretion) at no cost to you provided the Cocoon Cordless DECT Phone has been used in accordance with instructions provided. The benefits under our Warranty are in addition to other rights and remedies under consumer law in relation to these goods.
Page 20
HE413002BV4 After Sales Support Telephone: 1300 663 907 Internet: www.winplus.com.au...
Need help?
Do you have a question about the HE413002B and is the answer not in the manual?
Questions and answers