Table of Contents
Related Manuals for Logenex SCDM-SD1
Summary of Contents for Logenex SCDM-SD1
- Page 1 INSTALLATION & CONFIGURATION MANUAL SCDM-SD1, SCDM-SD2, SCDM-SD4 Single, Dual, Quad Input QAM Modulators Logenex Innovations Inc. 6A-7500 Martin Grove Rd. Woodbridge, Ontario L4L8S9 Tel: (905) 790-8823 Fax: (289) 371-3117 www.logenex.com...
-
Page 2: Table Of Contents
Logenex TABLE OF CONTENTS SAFETY PRECAUTIONS ....................3 PACKAGE CONTENTS ....................3 SPECIFICATIONS ......................4 INSTALLATION ......................5 HARDWARE INSTALLANTION and CONNECTIONS ................... 5 MODULATOR SETUP AND CONFIGURATION ..............5 INITIAL SETUP TO FACTORY DEFAULT ......................5 MODULATOR CONFIGURATION ......................... 6 CABLE PROVIDER SETUP……………………………………………………………………………………..9... -
Page 3: Safety Precautions
If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before connecting to an AC outlet. PACKAGE CONTENTS This package contains: One SCDM-SD1, SCDM-SD2 or SCDM-SD4 modulator One 12VDC 3A power supply One pair of mounting brackets Four adhesive pads ... -
Page 4: Specifications
Logenex SPECIFICATIONS SCDM-SD1 SCDM-SD2 SCDM-SD4 INPUT Video Input Composite/ASI Composite/ASI Composite/ASI 0.7 – 1.4V (peak-to peak) 0.7 – 1.4V (peak-to-peak) 0.7 – 1.4V (peak-to-peak) Video Input Level Video Mode NTSC/PAL NTSC/PAL NTSC/PAL Audio input Stereo Stereo Stereo 0.4 – 0.8V (p-to-p) 0.4 –... -
Page 5: Installation
Logenex HARDWARE INSTALLANTION and CONNECTIONS 1. The unit can be rack mounted in a standard EIA 19” rack. Attach the rack mounts if the unit is to be installed in a rack. 2. Use a 75Ω coaxial cable with RCA connectors to connect the video source (e.g., CATV, DVD, VCR, Camera) to the unit’s yellow RCA VIDEO INPUT jack... -
Page 6: Modulator Configuration
Logenex MODULATOR CONFIGURATION Once the modulator is powered back up it will go through an internal booting process. When “Running” appears in the LCD Display the unit is ready for programming or operation. Password – Press the OK button to select a 4-digit password. Use the Scroll Up/Down button to search and select individual numbers for the password. - Page 7 Logenex select the desired Contrast value (0 to 255) and press the OK button to set. Factory default is 128. Saturation – Use the Scroll Up/Down button to select Saturation. Press the OK button to enter the Saturation menu. Use the Scroll Up/Down button to select the desired Saturation value (0 to 255) and press the OK button to set.
- Page 8 Logenex 1 Video Input – Use the Scroll Up/Down button to select 1 Video Input. Press the OK button to enter the 1 Video Input menu. Use the Scroll Up/Down button to select the Video Input option: NTSC, PAL, ASI. The factory default is NTSC.
-
Page 9: Cable Provider Setup
Logenex CABLE PROVIDER SETUP Rogers: 988-991 Allows 4 channels to be modulated. Each input must be set to a program number ranging from 1-4 and will show on the below channels. Output Channel: 99 MHz | Channel 96 Program Number: 1...