Table of Contents
Advertisement
Select "Outbound Rules" from the left window. Check "Network Discovery
(SSDP-out), (UPnP Host-out),(UPnP-Out)" are all enabled in "Private", "Public",
and "Domain" Profile.
If not, enable all of them. After enabled/checked all of above items, you might
need to "Restart" your Windows and then run AIRFUN utility again.
7.1.6 Audio Playback Issue
This section is to check and troubleshoot the audio device when "Play"
AIRFUN application or after "Stop" AIRFUN application.
7.1.6.1 "Play" Mode Issue
If the audio does not work well after "Play" AIRFUN application, please check
the audio devices on your media player. For example: Windows Media Player
12 Select the audio device setting from Windows Media Player. The
"Speakers" should be set as "Default Audio Device". If not, select it and then
click "OK" or "Apply" to save the setting. Then close your media player and
restart-up it again.
7.1.6.2 After "Stop" Issue
If the audio does not work well after "Stop" AIRFUN application, please check
the audio devices on your PC. Open the "Sound" from "Control Panel". The
"Default Device" in the "Playback" tab should be set at your PC's hardware
audio speakers. In the left picture, the PC's hardware audio speakers is "High
Definition Audio Device". If not, select it and then click "OK" or "Apply" to save
the setting. Then close your media player and restart-up it again.
38
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the WinFast Wi2000D and is the answer not in the manual?
Questions and answers