Advertisement
7. Front Panel Controls
F5
F1
F2
F3
F4
F1: LCD Display - This display presents the selected menu screen and the parameter settings.
The backlight in the display is on when power is applied.
F2: LED – These lights indicate the status, which from left to right is power, normal and video.
F3: Left and Right Buttons – Use the left and right arrow buttons to navigate from screen to
screen to view a parameter setting within a particular program group. These buttons are
operational in the view mode or the program mode. Using only these buttons will not change any
parameter setting.
F4: Up and Down Buttons – Use the up and down arrow buttons to change the value of a viewed
parameter setting. The unit must be in the program mode in order for these buttons to become
active for changing a parameter setting.
F5: OK Button - Use the ENTER button to enter the program mode or to save and load a new
setting or settings after adjustment. Hold for approximately 2 seconds until the bottom line of the
display starts to flash to enter the program mode. After entering the program mode, momentarily
pressing the OK button again will load and save any settings that may have been changed using
the Up and Down buttons.
Advertisement
