Summary of Contents for XWire X905
- Page 1 REFERENCE MANUAL X905 20-B UHF W IGITAL IRELESS YSTEM Made in U.S.A. Serial No:...
- Page 2 • Limited Five Year Transferrable Warranty - For quality assurance. Made in U.S.A. UNPACKING As you unpack the X905, please check to be sure that along with the XR905 receiver, the following items are included: • XT905Bodypack or XH905 Handheld digital transmitter.
-
Page 3: Identifying Parts And Controls
• When this button is pressed, the • Each time the power is turned on, receiver will be set to receive data the receiver will display “Xwire on the next adjacent channel. Digital Wireless Systems” and go Example: 1-2-3-4-5...(cycle then... - Page 4 CONNECTIONS (RECEIVER) (BODY PACK TRANSMITTER w/ TA3 Input) (BODY PACK TRANSMITTER w/ 1/4” Input) (1) Power Supply Connector (3) Unbalanced 1/4” Output Connector • Connect to the power supply. • Connect to the input of an instru- • Power requirements are 12volt A/C ment amplifier.
-
Page 5: Operating Instructions
OPERATING INSTRUCTIONS Power Up Procedure To power up the transmitter, slide the power switch to the on position, one of the channel select LEDS will light to indicate power is on. To power on the receiver, first provide power to the unit using the wall adapter included with the system, then push the power button on the front panel, the LCD display should light up indicating power is on. -
Page 6: Additional Information
Warranty Information Xwire will repair or replace any defective system within the first two years free of charge. After the initial term, we will continue to re- pair or replace defective systems for an additional period of three years, for a flat fee of $35.00. (You are NOT required to pay this fee in advance, it is due only if repairs become necessary).