Advertisement
Quick Links
Advertisement
Summary of Contents for LOUD Technologies S218s
- Page 1 S218s REPAIR MANUAL S218s REPAIR MANUAL...
-
Page 2: Tools Needed
These instructions are intended to help restore any ailing S218s Passive Subwoofer back to factory working conditions. They show how to remove and replace the 18” woofer. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for the woofer. -
Page 3: Woofer Replacement
Woofer replacement: Eight screws need to be removed from the woofer using the 4mm allen wrench. Twenty screws need to be removed screws 1-5 from the front of the grill using the phillips head screwdriver. Keep the twenty screws in a safe place. screws 6-8 Keep the eight screws in a safe place. - Page 4 Woofer replacement continued: Carefully begin to remove the woofer. Remember, do not rest it on the grill support below. Caution: The woofer is approximately 22 pounds with the weight unevenly This woofer has a tendency to want distributed. to “pop” out, but it is held in place on the sides and needs to be guided out with minimal force.
- Page 5 Place the new woofer (part #0010141) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the S218s and the new woofer should now be pumping out glorious lows. Awesome, you just...
- Page 6 This page left blank intentionally...