NETGEAR WNDR4300v2 User Manual page 10

Pressing the WPS button
WiFi password. See WiFi Connection
Pressing the WiFi On/Off button
The following table describes the LEDs on the front panel.
Table 1. LED descriptions
LEDs
USB port
Ethernet LAN ports
2.4 GHz WiFi
5 GHz WiFi
Internet
Power
N750 WiFi Router
lets you use WPS to join the WiFi network without typing the
on page 15.
for two seconds turns the WiFi radios on and off.
Description
• Solid green. A USB device is connected and is ready.
• Blinking. A USB device is plugged in and is trying to connect.
• Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
• Solid green. A powered-on 1G device is connected to the Ethernet port.
• Solid amber. A powered-on 10/100 Mbps device is connected to the Ethernet
port..
• Off. No device is connected to this Ethernet port.
• Solid green. The 2.4 GHz WiFi radio is operating.
• Off. The 2.4 GHz WiFi radio is off.
• Solid blue. The 5 GHz WiFi radio is operating.
• Off. The 5 GHz WiFi radio is off.
• Solid green. The Internet connection is ready.
• Amber. The Ethernet cable is connected between the router and the modem but
the router is not connected to the Internet.
• Off. No Ethernet cable is connected between the router and the modem.
• Solid green. The router is ready.
• Blinking green. The router is booting.
• Off. Power is not supplied to the router.
Hardware Setup
10