Advertisement
Full installation assumes that you
have a destination device, such as
a VCR, television, or computer
equipped with video-digitizing
hardware, that makes use of the
video information output of the
VisiCam. The destination device
must be able to accept NTSC
video input.
Step 1. VisiCam Placement
Place the VisiCam on top of your
computer monitor (or wherever
you intend to keep it).
3. Installation
Step 2. The VIDEO Connection
Attach the supplied RCA
cable to the VisiCam's RCA
connector labeled VIDEO. Attach
the other end to your digitizer,
VCR, television monitor, or other
destination device.
Step 3. The POWER Connection
Attach the AC power adapter plug
to the VisiCam connector labeled
POWER. Plug the transformer into
a standard AC socket.
The image of what is in front of
the VisiCam should display on the
connected video device.
Installation
®
video
5
Advertisement
