Using the Screen Cover as a Stand (When Taking a Flipping Shot)
1. Disengage the rubber bands from the Paper Writer, open the cover and place it on a
desktop or other fl at surface.
2. Turn the Paper Writer so that it faces forwards and fi t the bottom into the notch in the
cover to fi x it in place.
Important!
•
The screws cannot be removed from the screen cover.
•
The screen cover is a synthetic leather product, so any moisture on the cover
should be immediately be wiped off gently with a soft, dry cloth.
Note also that it is sensitive to heat and should not be used close to a fi re or
similar location.
•
Do not hold the Paper Writer by the screen cover alone while the rubber bands
are not fastened around the Paper Writer. Doing so could damage the screen
cover.
•
When fi tting the Paper Writer into the cradle, lift up the screen cover slightly so
that the Paper Writer fi ts securely into the cradle.
•
To take a Flipping Shot, fi x the Paper Writer in the step 2 angle.
The shot cannot be taken correctly if the Paper Writer is at the wrong angle.
•
The Paper Writer will not be at the correct angle if the pen is inserted into the
pen holder.
When taking a Flipping Shot, fi rst take the pen out of the pen holder.
E-196
Notch