Back Panel - Skyworth 19E57 Service Manual

EXTERNAL SCHEMATIC AND INSTALLATION

Back Panel

Note: The graphics are for representation only.
POWER
1. HDMI1\HDMI2: Connect HDMI input signal from signal source such as DVD.
2. PC IN: Connect a PC via a VGA cable.
3. PC AUDIO IN: Audio input for PC and Audio input for HDMI when the signal is DVI timing.
4. COMPONENT IN (Y Pb Pr IN): Connect COMPONENT signal from signal source such as DVD.
5. AUDIO IN: Connect AUDIO input signal from signal source such as DVD.
6. VIDEO IN: Connect VIDEO input signal from signal source such as DVD.
7. ANTENNA IN: Connect a coaxial cable to receive signal from the antenna or cable.
8. USB1: USB port.
9. EARPHONE: Audio output, speakers will be muted when earphone is plugged and select
headphone; speaker will be not muted when
line output is selected in the auto pop-up menu or in the audio output item of
sound mode menu. The output audio signal is needed when TV connects to
other audio instruments, such as an audio amplifier
1
INPUT
HDMI2 HDMI1
2
PC PC
AUDIO
3
Share the same AUDIO input with AV IN.
an audio output plug is inserted and
-7-
8
USB1
5V
500mA
9
4 6
Y VIDEO
Pb AUDIO-L
7
Pr AUDIO-R
ANTENNA IN
5
.