Table of Contents
Advertisement
If your ISP uses PPPoE, please configure you Network Setup as follow:
Network
IP Address
Subnet Mask
Gateway
HTTP Port
Command Port
Media Port
Second Page (Click the "Next Page>" button at the lower right hand corner to access)
PPPoE Setting
PPPoE IP
DNS Address
DDNS
Auto Register
File Sharing
Mobile Port
Third Page Page (Click the "Next Page>" button at the lower right hand corner to access)
Email Setting
Username
Password
Server
Port
Object Address
Revert Address
NOTE: All settings in this screen will need to be "Saved" when exiting the setup menu before it will
take effect.
Select "DHCP"
Leave this field at its default or unchanged
Leave the Subnet mask as the default 255.255.255.0.
Leave this field at its default or unchanged
It is recommended to leave the setting at the default value of 80.
It is recommended to leave the setting at the default value of 5050.
It is recommended to leave the setting at the default value of 6050.
Set this option to "ON", then click the ">>" button on the right to access the
PPPoE Setting sub menu to enter the Username and Password of your
PPPoE account.
Enter the IP Address of your PPPoE server provided by your ISP in this field.
It is recommended to leave the DNS Address as the default 0.0.0.0
Set this field to "ON", then click the ">>" on the right to access the sub menu.
Enter the DDNS (Dynamic DNS) Server name, registered domain name, your
DDNS Username and Password.
Set this field to "ON", then click the ">>" on the right to access the sub menu.
Enter the Server IP, Server Port, and Time interval for your DVR to repeatedly
register with your DDNS server.
Please enable this option by making sure the box is checked if you will access
your DVR remotely.
It is recommended to leave the setting at the default value of 7050.
If you would like your DVR to send out notification or alarm e-mails to a specific
Address, click the ">>" button to access the E-mail setup page.
Enter your full e-mail account login name in this field.
Enter your e-mail account password in this field.
Please enter either the URL or IP Address of your mail server in this field.
Unless your e-mail server uses a unique port, it is recommended to leave the
setting in this field at its default value, 25.
Please enter the destination address for any notification e-mails you would like
your DVR to send to.
This is the address that is going to show as the "sender" in the e-mail to your
"Object Address".
First Page
25
User's Manual
Advertisement
Table of Contents
