Solid Apollo Onyx 2 Zone In-Wall Wireless LED Dimmer and Receiver Product Manual

Onyx 2 zone in-wall wireless led dimmer and receiver

Advertisement

Quick Links

PRODUCT MANUAL
Onyx 2 Zone In-Wall Wireless
LED Dimmer and Receiver

Product Description

The Onyx 2 Zone In-Wall Wireless LED Dimmer is an elegant wireless design with full wireless control for up to two LED zones. The dimmer is easy to
install and fits in any standard US switch gang box. The wireless connection saves time and energy by requiring no cabling from the wall controller
to the LED zones.
The Onyx 2 Zone includes a memory function, which remembers the last brightness setting even if the power goes out. The dimmer is the perfect
controller for all single color LED projects and runs on low 12V to 24V power. The Onyx 2 Zone is easy to install and operate, and will provide many
years of easy operation.
Main Functions:
• Control Up to 2 Zones Independently
• Wireless Control for Quick and Easy Installation
• Touch Sensitive Dark Glass Surface
• 50 Foot Wireless Range
• Soft Touch On/Off
• Memory Function - Remembers Last Setting
Even If Power Goes Off
This manual reviews:
• Entire installation process
• Product features and primary uses
• Detailed functionality
• Troubleshooting options
• Technical Parameters
Dimmer
Toll Free: 866.592.3873
Email: sales@solidapollo.com
www.SolidApollo.com
Receiver
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Onyx 2 Zone In-Wall Wireless LED Dimmer and Receiver and is the answer not in the manual?

Questions and answers

Summary of Contents for Solid Apollo Onyx 2 Zone In-Wall Wireless LED Dimmer and Receiver

  • Page 1: Product Description

    Product Description The Onyx 2 Zone In-Wall Wireless LED Dimmer is an elegant wireless design with full wireless control for up to two LED zones. The dimmer is easy to install and fits in any standard US switch gang box. The wireless connection saves time and energy by requiring no cabling from the wall controller to the LED zones.
  • Page 2: Product Manual

    Installation Solid Apollo’s Onyx 2 Zone Dimmer and Receiver can control up to two single color LED zones independently, for zones running from 12V to 24V DC. After the installation is complete, you can change the brightness on each LED zone independently from 0% to 100% brightness.
  • Page 3 PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com On the left green wiring slot block for the power supply, use the Philips Screwdriver to rotate the negative wiring screw counter clockwise to open the wiring slot located below the screw. The screw will not come out. Power Source NEGATIVE(-)
  • Page 4 ™ PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com At this time, you can attach up to three more LED fixtures by repeating step six using the right side green wiring blocks. Only one LED fixture is required to run the lights.
  • Page 5 ™ PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com Wiring Power and Mounting the Onyx 2 Zone Dimmer This section will show you how to connect the power source wiring and mounting the Onyx 2 Zone. Wiring Diagram for Dimmer POSITIVE(+) Power...
  • Page 6 ™ PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com Repeat the last step, but instead using the positive wire and the second from the left wiring block (labeled Vin). The rear mounting base is snapped onto the face of the Onyx 2 Zone. Using a flat head screwdriver, carefully insert the tip into the notch at the end of the Onyx 2 Zone.
  • Page 7 PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com Mount the face plate of the Onyx 2 Zone by first aligning the notch at the bottom so it lines up with the rear mounting plate.
  • Page 8 PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com Operating the Onyx 2 Zone This section will show you how to use your new Onyx 2 Zone. - Dimmer Off (Touch Once) - Dimmer On (Touch Once) Zone 1 Zone 2...
  • Page 9: Troubleshooting

    PRODUCT MANUAL Onyx 2 Zone In-Wall Wireless Toll Free: 866.592.3873 Email: sales@solidapollo.com LED Dimmer and Receiver www.SolidApollo.com Troubleshooting This section will show you how to troubleshoot the Onyx 2 Zone Dimmer and Receiver. If you are having problems with the lights responding to the Onyx 2 Zone Dimmer in either zone, first check that the dimmer is within range of the receiver (50 feet maximum).

Table of Contents