Table of Contents
Advertisement
Changing the unit's settings
(continued)
Refer to the control reference on page 67.
∫ To change the tuning settings for individual
programme position
6
Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
Pos
Name
Channel
Fine Tuning
Video
System
Audio Mode
Mono
Title Page
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 6.
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
RQT9011
72
Manual
Tuning
SELECT
RETURN
To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [OK].
To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between "Z" and "¢".
To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press [OK].
To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to "Auto".
To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if the
picture lacks colour, and press [OK].
Auto:
This unit automatically distinguishes
PAL and SECAM signals.
PAL:
For receiving PAL signals.
SECAM: For receiving SECAM signals.
To select the audio reception type
If sound quality is poor, press [3, 4] to select
"BG" or "L" and press [OK].
BG: PAL B.G.H/SECAM B.G
L:
SECAM L, L'
To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo, bilingual or NICAM broadcast,
and press [OK].
To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
Auto-Setup Restart
You can restart auto channel setting if set up (➡ 20) fails for some
reason.
After performing steps 1–4 (➡ 71)
5
Press [3, 4] to select "Auto-Setup
Pos
1
Restart" or "Download from TV" and
Name
ARD
Channel
4
press [OK].
Fine Tuning
Auto
Video System
Auto
The confirmation screen appears.
Audio Mode
BG
Select "Download from TV" when you connect the unit to a Q
Mono
Off
Title Page
301
Link compatible TV with a fully wired 21-pin Scart cable.
(Programme positions are downloaded from the TV and
RETURN : leave
copied through this convenient function.)
6
Press [2, 1] to select "Yes" and
press [OK].
≥If the country setting menu appears on the television
Press [3, 4, 2, 1] to select the country and press
[OK].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped,
Press and hold [X CH] and [CH W] on the main unit until the
country setting screen appears.
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
When the GUIDE Plus+ system setting message appears.
≥If you want to setup the GUIDE Plus+ system
Press [2, 1] to select "Yes" and press [OK].
Go to step 2 on page 21.
≥If you do not want to setup the GUIDE Plus+ system
Press [2, 1] to select "No" and press [OK].
Television picture appears. Setup is complete.
List of TV Reception Channels
Channel
indication
2 – 4
5 – 10
11 – 12
13 – 20
21 – 69
74 – 78
80
81 – 89
90 – 99
121 – 141
§
Only for 8 MHz channel raster
TV Channel
Italy
France
2 – 4
5 – 10, G – J
(172.00 to
E2 – E10
220.00 MHz)
(INTER
BANDE)
H1 – H2
—
A – H
—
E21 – E69
E21 – E69
S01 – S05
—
S1
—
B – F
(100.00 to
S2 – S10
172.00 MHz)
(INTER
BANDE)
K – Q (220.00
to 300.00 MHz)
S11 – S20
(INTER
BANDE)
S21 – S41
(299.25 to
§
S21 – S41
467.25 MHz)
(Hyperband)
(INTER
BANDE)
Other
Countries
E2 – E12
—
E21 – E69
S1 – S5
M1
M2 – M10
U1 – U10
S21 – S41
(Hyperband)
Advertisement
Table of Contents
