Table of Contents
Advertisement
NVR8008X Enterprise Rack Mount NVR
3.2.3.4 Adding Devices
You can manually or automatically add devices to the NVR. On the Device List Setup page, click the
Add button, the Maintain page appears.
Manually Adding a Device
Select a device type from the Device Type drop-down list, enter the device information and click
the Save button to save the settings. The device will be added to the Device List.
Automatically Adding Devices
On Figure above, click the
Auto Detection icon to switch to the Auto Detection page.
1. Check the square beside the Device Name to select a desired device. (Note: If multiple devices
have the same ID and Password, you can select multiple devices on this step).
22
Advertisement
Table of Contents
