Elite PRO-70X5FD Operating Instructions Manual

Elite PRO-70X5FD Operating Instructions Manual

Hide thumbs Also See for PRO-70X5FD:
Table of Contents

Advertisement

O
I
PERATING
NSTRUCTIONS
M
D'
ODE
ENPLOI
PRO-70X5FD
PRO-60X5FD
LED LCD TV
Téléviseur LCD LED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO-70X5FD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite PRO-70X5FD

  • Page 1 PERATING NSTRUCTIONS ENPLOI PRO-70X5FD PRO-60X5FD LED LCD TV Téléviseur LCD LED...
  • Page 2 • For the Spanish version of this operation manual, go to www.elitelcdtv.com/espanol. • Pour la version en espagnol de ce mode d'emploi, veuillez consulter www.elitelcdtv.com/espanol. • Para le versión en español de este manual de operación, acceda a www.elitelcdtv.com/espanol.
  • Page 3: Operation Manual

    PRO-70X5FD PRO-60X5FD LED LCD TV ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV.
  • Page 4: Fcc Compliance Statement

    DECLARATION OF CONFORMITY: ELITE LIQUID CRYSTAL TELEVISION, MODEL PRO-70X5FD/PRO-60X5FD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 5: Dear Elite Customer

    DEAR ELITE CUSTOMER Thank you for your purchase of the Elite LCD TV. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges.
  • Page 7 • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. VISIT http://www.elitelcdtv.com for ordering, or call 1-855-ELITE-01 CHILD SAFETY:...
  • Page 8: Trademarks

    Caution regarding the power supply • Use the USB cable to connect to a USB terminal of a 3D compatible Elite LCD TV for supplying power. Supplying power using other devices may lead to heat generation or battery damage.
  • Page 9 Trademarks • ELITE and the ELITE logo are registered trademarks of Pioneer Corporation. • THX and the THX logo are trademarks of THX Ltd. which are registered in some jurisdictions. The THX 3D logo is a trademark of THX Ltd. All rights reserved.
  • Page 10: Table Of Contents

    Enjoying 3D Image Viewing DEAR ELITE CUSTOMER ......3 Display Methods for 3D and 2D Images ..42 IMPORTANT SAFETY INSTRUCTIONS .
  • Page 11: Supplied Accessories

    Supplied Accessories Make sure the following accessories are provided with the product. See pages 43 to 47 for details of the 3D Glasses and their accessories. Remote control unit "AA" size battery Cable tie Stand unit 3D Glasses ( g 1) ( g 2) ( g 1) ( g 1)
  • Page 12: Quick Installation Tips

    IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE • Speakers cannot be detached from the TV. INSTALLATION STEPS. • The TV angle cannot be adjusted. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-855-ELITE-01.
  • Page 13: Preparation

    Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
  • Page 14: Part Names

    Part Names TV (Front/Side) POWER button MENU button INPUT button Channel buttons OPC sensor *2 Volume Remote control sensor buttons (VOL / ) Power LED 3D infrared emitter *3 (See page 34.) *1 See pages 19 and 26 for button operations. *2 OPC: Optical Picture Control (See page 28.) *3 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images.
  • Page 15: Remote Control Unit

    Part Names POWER: Switch the TV power on or enter standby. (See Remote Control Unit page 19.) TV, STB, BD•DVD, AUDIO: Switches the remote control for TV, STB, BD, DVD and AUDIO operation. (See pages 60 to 61 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, BD•DVD or AUDIO) and DISPLAY at the same time.
  • Page 16: Introduction To Connections

    Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used.
  • Page 17: Connecting To External Equipment

    Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 14 and 22.) For connecting the TV to external equipment, use commercially available cables.
  • Page 18: Connecting A Vcr, Game Console, Camcorder Or Cable/Satellite Set-Top Box

    Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable AUDIO-R (Red) AUDIO-L (White) COMPONENT OUT (Red) Y (Green) (Blue) Component video cable • To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.
  • Page 19: Audio System

    Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV amplifi er for surround system HD Cable/Satellite set-top box HDMI-certified cable *1 HDMI OUT OPTICAL DIGITAL AUDIO INPUT HDMI OUT HDMI IN Optical fiber cable *2 •...
  • Page 20: Connecting A Pc

    Connecting to External Equipment Connecting a PC Refer to page 67 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3, 4 or 5): HDMI-certified cable HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 1 terminal, connect a Ø...
  • Page 21: Watching Tv

    Watching TV Turning On/Off the Power Initial Installation When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels POWER available in the region where you live. Perform the following steps before you press POWER on the remote control unit.
  • Page 22 Watching TV Antenna & Cable/STB Press a / b to select the Daylight Savings Time, and then press ENTER. Select the type of connection you will use to watch TV. Auto Press c / d to select "Antenna & Cable" or "Set- top box", and then press ENTER.
  • Page 23 Watching TV CH Search (Channel search) Completed Channel auto search makes the TV look for all The settings confi rmation screen is displayed. channels viewable in the set area. Confi rm the information displayed on the screen, and then press ENTER. When "Air"...
  • Page 24: Direct Button Operation

    Direct Button Operation Changing Volume You can change the volume by pressing VOL k / l on the TV or on the remote control unit. • To increase the volume, press VOL • To decrease the volume, press VOL Audio status Output Select Output device Fixed...
  • Page 25: Av Mode

    *2 "x.v.Color" can only be selected when an x.v.Color signal is input using HDMI 1 to 5. Displays the Netfl ix screen. ELITE PURE: More realistic, tuned image with superior Press NETFLIX. black levels. OPTIMUM: Optimizes the image quality automatically based on the room brightness and image signal.
  • Page 26: Closed Captions And Digital Closed Captions

    Direct Button Operation Closed Captions and Digital Closed Captions Press CC. Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration • This will present the Closed Caption information display. and sound effects as subtitles on your TV. Closed Press CC while the Closed Caption information is Captions are available on some TV programs and on still on the screen.
  • Page 27: View Mode

    Direct Button Operation VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
  • Page 28: On-Screen Display Menu

    On-Screen Display Menu On-Screen Display Menu Operation LCFONT embedded Press MENU to display the MENU screen. Example Press a / b to select the desired menu. I C T U R E E T T I N G S I C T U R E E T T I N G S Picture Settings U D I O...
  • Page 29: Menu Items

    On-Screen Display Menu Menu Items • When AV MODE is set to "OPTIMUM", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings Input Terminal Setting....Pages 33, 67 Audio Setup ......
  • Page 30: Picture Settings

    Select from the following AV modes. ENTER. ■ When the input source is TV, COMPONENT, VIDEO 1 or 2: ELITE PURE/OPTIMUM/STANDARD/MOVIE/MOVIE (THX)/ GAME/USER/DYNAMIC/DYNAMIC(Fixed)/ISF DAY/ISF NIGHT ■ When the input source is PC IN or HDMI 1 to 5: ELITE PURE/OPTIMUM/STANDARD/MOVIE/MOVIE (THX)/ GAME/PC/USER/x.v.Color/DYNAMIC/DYNAMIC(Fixed)/...
  • Page 31: Color Temperature

    FluidMotion: FluidMotion combines an advanced • "Digital Noise Reduction" is not available when you set AV 120Hz system with ELITE's unique scanning backlight MODE to "PC" or PC format is being input. technology to create an over 240Hz effect which •...
  • Page 32: Audio Settings

    On-Screen Display Menu Audio Settings Auto Volume Different sound sources sometimes do not have the You can adjust the sound quality to your preference same loudness level, such as a program and its with the following settings. commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing Example levels.
  • Page 33: Power Control

    On-Screen Display Menu Power Saving Power Control This function allows you to set the Power Saving level Power control setting allows you to save energy. in order to decrease the power consumption and increase the backlight lifespan. Example Standard: Optimizes power reduction based upon video content.
  • Page 34: System Options

    On-Screen Display Menu System Options View Mode This function changes the screen size. Example Select "View Option" on the menu to display the View Mode menu screen. The View Mode menu varies depending on the input source. Y S T E M P T I O N S •...
  • Page 35: Output Select

    On-Screen Display Menu ■ Digital broadcasting audio mode HDMI Setup The types of audio transmitted in a digital broadcast include To watch an HDMI or PC IN equipment image, select SURROUND as well as MONO and STEREO. In addition, it "HDMI 1", "HDMI 2", "HDMI 3", "HDMI 4"...
  • Page 36: Caption Setup

    On-Screen Display Menu Position Operation Lock Out For adjusting a picture's horizontal and vertical This function locks the operation buttons on the TV position. and the remote control. H-Pos.: Centers the image by moving it to the left or Off: No adjustment. RC Control Lock: All buttons on the remote control are right.
  • Page 37: Initial Setup

    On-Screen Display Menu Initial Setup Antenna & Cable/STB: Select the type of connection you will use to watch TV. Air/Cable: Make sure what kind of connection is made Example with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for N I T I A L all channels viewable in the set area.
  • Page 38 On-Screen Display Menu Favorite CH (Favorite Channel Setting) Reset This function allows you to program 4 favorite If complex adjustments are made and the settings channels, in 4 different categories. By setting the cannot be restored to normal, you can reset the favorite channels in advance, you can select your settings to the factory preset values.
  • Page 39 On-Screen Display Menu V-Chip ■ TV Parental Guidelines Example V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control MPAA over broadcasts accessed by their children. It allows TV Guidelines TV-Y parents to select programs judged suitable for child Can.
  • Page 40 On-Screen Display Menu ■ Canadian French Ratings Canadian Rating Systems (Canadian English ratings and Canadian French ratings) Example • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications MPAA Commission (CRTC) policy on violence in television TV Guidelines programming.
  • Page 41: Information

    On-Screen Display Menu Information Press a / b to select "Software Update", and then press ENTER. Example • If you have already set the Secret No., go to step 3. Example N F O R M A T I O N N F O R M A T I O N Information Information...
  • Page 42 If you have any questions, • When a server connection cannot be established or an update is not available, a message is displayed. please call 1-855-ELITE-01. If a server connection cannot be established, check the CAUTION broadband connection and Internet Setup.
  • Page 43 On-Screen Display Menu Press ENTER to start checking the data in the USB To update the TV software with the update fi le, select "Yes", and then press ENTER. memory device. Software update file is detected Insert the USB memory device in the USB memory device.
  • Page 44: Enjoying 3D Image Viewing

    Enjoying 3D Image Viewing You can use special 3D Glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through the 3D Glasses supplied with the TV or through optional 3D Glasses sold separately.
  • Page 45 Enjoying 3D Image Viewing 3D Glasses Supplied Accessories for 3D Glasses Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided. 3D Glasses Nose pad *1 USB cable*2 Glasses case Cleaning cloth (×2) (small ×2, large ×2) (×2)
  • Page 46 Attaching the nose pad Removing the nose pad off once every 0.5 seconds. If it still does not respond, inquire with a retail dealer or Elite LCD TV Authorized Using the 3D Glasses Service Center. After the recharge has completed, turn off the TV, and then remove the USB cable from the 3D Glasses.
  • Page 47 Enjoying 3D Image Viewing Using the 3D Glasses with Power Supply Pull the front casing outward with your fi ngers while pulling the base of the right temple arm inward with If you slide the switch to 3D or 2D after taking steps 1 your fi...
  • Page 48: Viewing 3D Images

    Enjoying 3D Image Viewing Switching from 3D to 2D Mode Viewing 3D Images Press 3D during the 3D mode. Select "Yes" and press ENTER to switch to 2D mode. • Take off the 3D Glasses and turn off the power. Ending 3D Image Viewing •...
  • Page 49: Configuring The Tv Settings To Enhance

    Enjoying 3D Image Viewing Switching from 3D to 2D Mode Confi guring the TV Settings to Press c / d to select the 2D signal type ( "Side by Enhance 3D Image Viewing Side" or "Top and Bottom") and then press ENTER. Example I C T U R E Side by Side...
  • Page 50 Enjoying 3D Image Viewing 3D Setup 3D Still Image Effect Setting You can make various settings to enhance 3D image Select the method for adjusting the 3D still image viewing. effect (depth). Auto: Adjusts the still image effect (depth) automatically. Example Manual: Manually adjust the still image effect (depth).
  • Page 51 Enjoying 3D Image Viewing • These 3D Glasses are only for use with Elite LCD TVs supporting 3D. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses.
  • Page 52: Specifi Cations - 3D Glasses

    3D Glasses Model number AN-3DG20-EL Lens type Liquid crystal shutter Power supply DC5V (supplied by a USB terminal of an Elite LCD TV) Battery Lithium ion polymer rechargeable battery (DC3.7V 70mAh) Battery life* Approx. 30 hours of continuous use Charging time 90 minutes ×...
  • Page 53: Enjoying Photo/Music/Video Playback

    Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data.
  • Page 54: Select The Files To Play Back

    Enjoying Photo/Music/Video Playback Press c / d to select "Photo", "Music" or "Video", Select the Files to Play Back and then press ENTER. Example Photo Music Video Press c / d to select the desired folder, and then press ENTER. •...
  • Page 55: Playing Back Files On A Usb Memory Device

    Enjoying Photo/Music/Video Playback Viewing Individual Photos Playing Back Files on a USB Memory Device The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation Photo Mode Buttons Description Viewing Thumbnails c / d Go to the previous/next photo in the same directory.
  • Page 56 Enjoying Photo/Music/Video Playback Press RETURN to display the thumbnail selection screen, and then press C to start the slide show and the background music. • All of the music fi les are selected by default. ■ Set/Reset All Slide Show Image Set or reset the images to be displayed.
  • Page 57: Usb Menu

    Enjoying Photo/Music/Video Playback Video Mode Example video 1 video 2 video 3 video 4 video 5 VIDEO_01.avi 3:42 VIDEO_02.divx 4:55 VIDEO_03.divx 4:35 VIDEO_04.avi 4:08 VIDEO_05.divx 4:20 VIDEO_06.divx 3:55 VIDEO_07.avi 4:26 Buttons for fi le selecting operations Buttons Description a / b / c / d Select a desired item.
  • Page 58 Enjoying Photo/Music/Video Playback ■ Using the operation panel USB Menu You can use the operation panel for video playback Menu for fi le selecting operations operations. Example You can call up this operation panel by pressing MENU after you press a / b to select "USB Operation USB MENU...
  • Page 59: Divx Setup

    Enjoying Photo/Music/Video Playback ® DivX Setup USB Device Compatibility This is the function to confi rm your registration code. USB device USB Memory, USB card reader (Mass You need to register the code at http://www.divx.com. Storage class), USB hard drive Press MENU to display the menu screen.
  • Page 60: Playing Back Files On A Home Network (Dlna) Server

    Enjoying Photo/Music/Video Playback Viewing Individual Photos Playing Back Files on a Home Network (DLNA) Server The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation Buttons Description c / d Go to the previous/next photo in the same directory.
  • Page 61 Enjoying Photo/Music/Video Playback Video Mode Example /Root/Videos/Folders/ Videos VIDEO_02 4:55 VIDEO_03 4:35 VIDEO_04 4:08 VIDEO_05 4:20 VIDEO_06 3:55 VIDEO_07 4:26 Buttons for fi le selecting operations Buttons Description a / b / c / d Select a desired item. ENTER When selecting a folder icon: Enter this directory.
  • Page 62: Other Viewing Options

    Other Viewing Options Manufacturer codes Presetting Remote Control Function REMOTE CONTROL CODE STB mode You can operate the connected AV products (AV NUMBER receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, CATV LD) using the presetting manufacturer function of your Pioneer 01, 02 remote control unit.
  • Page 63: Operating The Connected Equipment

    Other Viewing Options 1 POWER (SOURCE) Operating the Connected Equipment • Turns the connected equipment power on and off. 2 0–9, • (DOT) (STB) To operate the connected equipment, press STB, • Press a button (or buttons) that corresponds to the DVD or AUDIO to select your device.
  • Page 64: Using Link Control

    Using Link Control Controlling HDMI Equipment Using Link Control What’s Link Control? • Using the HDMI CEC (Consumer Electronics Control) protocol, with Link Control you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting Link Control-compatible devices with HDMI-certifi ed cables to the TV, you can control a recorder or AV amplifi...
  • Page 65: Selecting Recorder

    Using Link Control Link Control Setup Channel Select Key This function can be set for each input terminal. Example On: The remote control unit of the TV can be used to select the channel, display program information, Y S T E M and perform other operations of a connected Link P T I O N S Control-compatible recorder.
  • Page 66: Link Operation Menu

    Device Operation panel HDMI Device Selection • This function works only when Link Control-compatible Play from Rec. List Link Control Setup ELITE equipment with the Device Operation Panel function Show Start Menu Start Recording is connected. Change Media of Device...
  • Page 67 Using Link Control Timer Recording HDMI Device Selection You can call up the Link Control-compatible If multiple HDMI devices are connected in a daisy recorder’s EPG and preset timer recordings using the chain, you can specify which device to control here. TV’s remote control.
  • Page 68: Using A Pc

    Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received.
  • Page 69: Adjusting The Pc Image

    Using a PC Example Setting Audio Input Y S T E M Audio Select P T I O N S This function sets the terminal to output the computer System Options audio. The adjustment items vary depending on the input source.
  • Page 70: Control Of The Tv

    Using a PC Control of the TV ■ Communication conditions for RS-232C • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. Set the RS-232C communication settings on the PC to •...
  • Page 71 110, 111: For an ISF (110 or 111) mode, adjustments by an ISF-certificated 14: STANDARD (3D), 15: MOVIE (3D), 16: GAME (3D), technician are required. 17: MOVIE (THX), 18: MOVIE (3D THX), 100: OPTIMUM, 110: ISF DAY, 111: ISF NIGHT, 300: ELITE PURE VOLUME V O L M Volume (0–60)
  • Page 72: Using The Internet

    • The ELITE ADVANTAGE LIVE is a website set up specifi cally for Elite LCD TV owners. • The website is worth visiting as it provides a range of useful information, including tips on using your Elite LCD TV and a frequently asked questions section.
  • Page 73 Using the Internet Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 72.) Wireless LAN router/ access point Modem Internet •...
  • Page 74: Internet Setup

    (See page 73.) Press APPS to display the application window. • If you select "Wireless", use "Wireless Setup" to Press a / b / c / d to select "ELITE ADVANTAGE confi gure the access point settings. LIVE" and then press ENTER.
  • Page 75: Elite Advantage Live

    Press APPS to display the application window. Press a / b / c / d to select "ELITE ADVANTAGE LIVE", and then press ENTER. • You can also display the ELITE ADVANTAGE LIVE...
  • Page 76: Entering Text (Software Keyboard)

    Using the Internet Entering Text (Software Keyboard) Caps Off/Caps On/Caps Lock If "alphabet" is selected in "Character Set", this switches characters between uppercase and lowercase. When you are editing an input screen or specifying the Each time you press ENTER, the character type switches as Ethernet settings used for accessing the Internet, enter shown below: text from the software keyboard.
  • Page 77: Using The Browser

    • You cannot download fi les. • You cannot view a history of the pages you have visited. • You cannot change the startup page displayed when you start ELITE ADVANTAGE LIVE. • Pop-up windows appear in separate tabs. ELITE ADVANTAGE LIVE ELITE ADVANTAGE LIVE...
  • Page 78 Goes back to the original page when you have viewed the previous page. Refreshes the page. Interrupts a page while it is loading. Displays the ELITE ADVANTAGE LIVE. Select this to open a bookmark. Adds the current page to your bookmarks. Displays the Browser menu.
  • Page 79 Using the Internet Saving the URL of the Current Page Editing Bookmarks Adding a web page to your bookmarks allows you to You can rearrange or delete the bookmarks. return to that page later by simply selecting it from your ■...
  • Page 80 Using the Internet Browser Settings Security Settings Security: You can check or modify your browser settings from Save Setting: If you select this option, a message is the Browser menu. The Browser menu includes a display settings menu displayed when you move from a protected page to an unprotected page.
  • Page 81: Using Applications Via The Internet

    Using the Internet Using Applications via the Internet • These applications are provided by content providers. The By connecting the TV to the Internet, you can enjoy a available applications vary depending on your country or variety of broadband content, including videos, movies, region.
  • Page 82 Using the Internet When you access the Internet application for the fi rst time, the following appears. • This message is available only in English. DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties.
  • Page 83: Appendix

    Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. Unfasten the four screws used to secure the stand in Detach the stand from the TV.
  • Page 84: Setting The Tv On The Wall

    • Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall About setting the TV angle AN-52AG4 wall mount bracket. PRO-70X5FD (See the bracket instructions for details.) AN-52AG4 • The center of the display: inch (10.0 mm) above the "c"...
  • Page 85: Troubleshooting

    Appendix Troubleshooting Problem Possible Solution • Check if you pressed POWER on the remote control unit. Page 19 • No power If the Power LED on the TV does not light up, press POWER on the TV. Page 10 • Is the AC cord disconnected? Page 19 •...
  • Page 86: Troubleshooting - 3D Images

    • This is not a malfunction. This happens when the cabinet slightly expands and contracts cracking sound. according to change in temperature. This does not affect the TV's performance. Page 70 • The ELITE ADVANTAGE LIVE • Is the ETHERNET cable connected correctly? Pages 72 to 73 cannot be displayed.
  • Page 87: Clearing The Secret Number

    Appendix CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Select an item from the list below to display the secret number input screen. (For operating the on-screen display menu, see page 26.) •...
  • Page 88: Specifi Cations

    Specifi cations Item Model: PRO-70X5FD Model: PRO-60X5FD 70 o Class (69 o Diagonal) 60 o Class (60 o Diagonal) Size panel 2,073,600 pixels (1,920 g 1,080) Resolution TV-standard (CCIR) American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV...
  • Page 89: Wireless Lan

    Specifi cations Wireless LAN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 90: Information On The Software License For This Product

    Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. ■ Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.
  • Page 91 Information on the Software License for This Product ■ Software Copyrights XMLRPC-EPI Copyright 2000 © Epinions, Inc. libjpeg This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are based in part on the work of the Independent JPEG Group. OpenSSL Copyright ©...
  • Page 92: Calling For Service

    Product which were caused by repairs or attempted repairs performed by anyone other than an Elite LCD TV Authorized Servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage.
  • Page 94 NOTE...
  • Page 95: Dimensional Drawings

    Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) PRO-70X5FD (50) (69) (1624) (77) (1538.88) (137) (333) (536) 10° (400) (215) (136) (264) AN-52AG4 PRO-60X5FD (44.3) (59) (1400) (77) (1329.12) (137) (536) (333) 10° (400) 5 (127) (244) (237) AN-52AG4 Active area/Área activa...
  • Page 96 Register Your Product on http://www.elitelcdtv.com (in USA only) Enregistrez votre produit sur http://www.elitelcdtv.com (aux Etats-Unis uniquement) Printed in Mexico Imprimé au Mexique TINS-F205WJZZ 11P07-MX-NM...

This manual is also suitable for:

Pro-60x5fd

Table of Contents

Save PDF