Edit Sensor - Delta Security GSM Alarm System User Manual

d. Edit Sensor
Each sensor within the system can be edited with different features and functions. Identify the
sensor's name by either way of above two methods, press "Enter" to confirm.
【Edit the Zone Name】: Sensor name has to be controlled within 25 letters. When panel
receives an intrusion signal from this sensor, panel will report all your programmed
www.deltasecurity.cn
information to owner by SMS. It's highly suggested to program the name with much more
information. Then the owner will be well informed in event of intrusion. For example, PIR in
living room can be named "PIR01 living room"
【Record Zone Name】 : Record the sensor name within 5 seconds. The system will count down
from 5. The record will be played when the emergency call is answered. Same as zone name,
it's highly suggested to record as much information as possible.
【Emergency Zone】: The alarm will be triggered in event of intrusion even the system is in
Disarm, Home Mode status.
【Home Zone】: 【YES】Home zone ; 【No】Normal zone
At home mode, all the sensor being preset as home zone will disarm and those in normal
zones are armed.
【Chime Zone】: Turn on/off the chime function
【Delayed Zone】: Delay the system alarm. We can program the delay time at
"Menu"---"Program"---"System Settings"---"Alarm Delay Time"
【Siren Enabled】 : Turn on/off the siren in event of being triggered
【Delete】：Delete the Sensor