Summary of Contents for Lutema WaveCube MITPS02CS
- Page 1 Manual MODEL: • MITPS02CS • MITPS02CN • MITPS02CG • MITPS02CB • MITPS02CP The ULTIMATE Rechargeable Portable Digital Audio System...
-
Page 2: General Functionality
“The ULTIMATE Rechargeable Portable Digital Audio System” Maintaining your WaveCube: - Avoid contact with liquids - Avoid prolonged exposures to extreme temperatures or humid weather - Make sure that the battery is fully charged before use. For a more detailed manual visit www.lutema.com POR FAVOR RECICLA... -
Page 3: Battery Life
Should this happen, charge the speaker separately while not playing music. Front Panel Buttons: The Lutema WaveCube Portable has 4 main buttons on the front panel: Starting from left to right: MENU Opens main menu, use to make menu selections. - Page 4 3. Calendar: Displays date and local time. NOTE: This speaker uses the International Clock 0 to 24. 4. Music: Choose to play music from either MicroSD card or USB key 5. FM Radio: Choose local radio stations 6. Line in: Connect to the computer 7.
- Page 5 • Press MENU to move across to the MONTH. VOL - / VOL + to decrease/increase the month. Be sure about your choice – there is no back option. If you choose incorrectly you’ll have to start from the beginning. •...
- Page 6 Set Power O Set: Pick a time to have the speaker automatically turn o : • Press MENU button twice to display power bar. • Use VOL - / VOL + to raise or lower the time set. Highest is 60 minutes. •...
- Page 7 MENU OPTION 4: Music Choose to play music from either a MicroSD card or USB key. Note: The Music menus will not show or be accessible until card or key has been installed. MicroSD option Insert the MicroSD card and press it all the way down. Make sure the speaker has been turned on.
- Page 8 • Once you have chosen the option, press MENU to choose option. • Click on EXIT to leave with making any changes. 4b. EQ Settings This option controls the output from the Lutema speaker. Choose the equalizer settings for di erent types of music. To activate: •...
- Page 9 4c. Repeat The repeat button only works when the song is playing. To activate: • Press MENU to open. VOL - / VOL + • Use to scroll through list to Repeat Mode. • Press MENU to select. • You’ll notice a blinking A-B sign on the top line. •...
- Page 10 Exit: Leave this menu without saving anything. If you can’t get out of the FM radio, hold MENU for a few seconds. If that doesn’t work turn the Lutema speaker off using the on/off switch. Tips for playing music: VOL - / VOL + •...
- Page 11 MENU OPTION 6 Line in Connect to your computer or smartphone to use the Lutema WaveCube as peripheral speaker. To activate this option: You’ll need the cord with a Line In/5V connector on one end and the speaker headphone jack on the other. Plug the Line In connector into the speaker and the headphone jack into your computer or smartphone.
Need help?
Do you have a question about the WaveCube MITPS02CS and is the answer not in the manual?
Questions and answers