QUICK GUIDE 1. Choose where to install the Silver Bullet radar detector • Windshield installation to use with batteries (wirelessly) or with power cord. • Dashboard and Visor installations work exclusively with the power cord. 2. Install radar detector Windshield – with Battery (use Bracket A) 1.
Page 3
QUICK GUIDE 1. Mount the radar detector directly onto the Dashboard – with Power Cord (use Hook & Loop Fastener) dashboard using the hook & loop fastener (with sticky sides attached to the dashboard and bottom of radar detector). HOOK & LOOP 2.
Page 4
3. Turn on the radar detector 1. Move the POWER switch to ON. 2. The screen will display ”SENSORO RADAR DETECTOR * * * FILTER-NORMAL” indicating a normal filter mode. 3. The screen will then display a random compass direction if the compass has not been set-up since purchase.
Page 5
QUICK GUIDE 5. Receiving alert messages • When a radar signal is detected, the screen displays the name of the band – “X”, “K”, or “KA” – and a number indicating the strength of the signal (1 to 8). • The higher the number, the stronger the signal. •...
Page 6
For more information on how to get the most from your radar detector, see the Operation Manual. PNI Corporation 5464 Skylane Boulevard, Suite A • Santa Rosa, CA 95403 - USA 1-888-422-6672 • fax: 1-707-566-2261 www.pnicorp.com 12180 R01 1003074 R01...
Need help?
Do you have a question about the SILVER BULLET RX7600 and is the answer not in the manual?
Questions and answers