1) Live Mode When first turned on, BEATBOX is in Live Mode. In Live Mode you can play beats using Controller 1. Each button corresponds to a different Drum Sample. To enter Live Mode press SELECT on Controller 2. Entering live mode will also turn off both Recording and Play Modes.
Page 3
Controller 1 Controller 1 - Drums Each button corresponds to a different sample. There are 2 Drum Kits to choose from. Rock: Bass Drum (UP), Hi Hat (DOWN), Clave (LEFT), Ping (RIGHT), Clap (SELECT), Snare (START), Tom Lo (B), Tom Hi (A). Latin: Bass Drum (UP), Conga Hi (DOWN), Conga Mid (LEFT), Cong Lo (RIGHT), Cowbell (SELECT), Snare (START), Wood Block Hi (B), Wood Block Lo (A).
Page 4
Controller 2 Controller 2 - Loop Controls Play: The Directional buttons correspond to the 4 Loops and the A and B buttons correspond to the 2 Fills. Pressing these buttons in Play Mode will trigger the corresponding part to start playing. Record: To Record a given part, press START first, then press the corresponding button.
Page 5
Counters: There are 2 counters to watch when recording Loops and Fills. The counters will start right after the first key press. If any of the counters gets down to zero then BEATBOX will stop recording. 1. Each Loop / Fill can save up to 99 key presses. The top counter with the Note icon counts down the number of key presses left.
Need help?
Do you have a question about the BEATBOX and is the answer not in the manual?
Questions and answers