Operation Instructions; Basic Operation; Bluetooth® Pairing Mode; Charging - Promate Fusion-Air User Manual

Operation Instructions:

1. Basic Operation

• Power switch: Located on the keyboard, switch it to turn Fusion-Air on/off.
2. Bluetooth® Pairing Mode
• Turn the keyboard on by sliding the Power On/Off Switch to the" On" position.
• Activate Bluetooth® on your iPad Air, by going to settings, taping on the
general tab, going to the Bluetooth setting and turning it on.
• Set it to search for new devices.
• To activate pairing mode on Fusion-Air, press the Bluetooth Connection Key
until the Blue LED indication begins blinking.
• Select "Fusion-Air" from the list of found devices on your iPad and connect.
• Enter the 4 digit passcode shown on your iPad Air using the Bluetooth
keyboard to pair and connect Fusion-Air to your device.
• Blue LED will turn off once paired.

3. Charging

Plug the USB cable included to a USB port and the other end into Fusion-Air's
charge jack. Charging Status LED will light up red while it is charging and when fully
charged turns green. When battery is low, the Red LED will start blinking. When
this happens, kindly charge Fusion-Air immediately. Before using the Bluetooth®
Keyboard for the first time ensure that it is charged for at least 2-3 hours.
4