Using Irobot Looj - iRobot Looj Owner's Manual

Using iRobot
Always test Looj before using it.
Prior to using Looj in a gutter, try driving forward and backward on the
ground. Try spinning the auger in both directions. Note the lights on the
remote control handle and on the robot blink during transmission.
Also, practice attaching and detaching the handle as described on page 10.
Using Looj
1. The optimum spot for ladder placement is away
from wires, hazards, on flat ground, etc. Read and follow
ladder instructions provided by the ladder manufacturer before
using a ladder. See "Important Safety Instructions" section for
more details.
2. Attach Looj to the belt clip or place Looj into holster.
3. Climb the ladder.
4. Remove debris from gutter at the
corner of the roof. Place Looj in gutter.
Remove debris from gutter directly in
front of ladder. If you do not, you may
be sprayed by debris when Looj begins
to operate.
CAUTION: Wear safety glasses when
using Looj to protect your eyes from debris.
5. P ress the power switch on the robot to turn it on. The power
light should be green to indicate that its battery is charged.
A red power light indicates that you should charge Looj's battery.
Looj
® ™
www.irobot.com
13