Customize Your Smart Remote - Samsung Galaxy Note 4 User Manual

Customize Your Smart Remote

Set up your phone to control your TV, Set-top box, DVR, Stereos, and other electronic devices.
Note: Your TV or other device must be turned off to customize Smart Remote.
Set Up Your Smart Remote to Control Your TV
1. From a Home screen, tap
2. Tap Universal Remote Control > Continue.
3. Tap to select your TV brand.

If your TV is not listed, tap Show other brands to choose from a full list of brands.

If you are using a projector, tap I have a home projector, and then choose the brand of
projector.
4. Aim your phone at the TV, and then tap
Transmitter on the top of your phone is pointed at the TV.
5. Confirm the codes:

If the TV turned on, tap Yes, this code 1 works.

If the TV did not turn on, tap No, text next code 2, or Send this code 1 again. Depending
on the model of your TV, you may need to try several codes to find the one that works.
6. From the Select your channel source screen, select the entry that matches your current method
for changing channels:

Set-top Box: Choose this if you use a set-top box from your TV service provider to change
channels. Continue to choose the brand of your set-top box, and then tap Enable IR to
configure your set-top box to receive commands from your phone's Infrared Transmitter.

My xxx TV: Choose this when your TV signal is fed directly into the TV, and you currently
use your TV remote to change channels.
Tools and Calendar
Apps > Smart Remote.
Power to turn on your TV. Be sure the Infrared
122