Advertisement
To the Owner
We would like to thank you for investing in a Wilson Benesch Loudspeaker.
Please return your completed Guarantee Registration Card or use the electronic registration within six weeks
of purchase. Warranty conditions can be viewed towards the back of this manual.
For electronic registration please refer to the Wilson Benesch website to take advantage of the Customer
Guarantee Registration. You can access the registration area via the 'Owners Section' on the Home Page at:
www.wilson-benesch.com
To the Music Connoisseur
To the cognoscenti of British high performance audio, the Wilson Benesch marque is recognised as one of
the world's leading loudspeaker design and manufacturing companies. You now own a product that will
deliver years of pleasure to all who come across it, within the comfort of your own home. The purchase of a
Wilson Benesch loudspeaker is merely the beginning of a long relationship. The Square Series II products are
engineered to last a lifetime and are guaranteed for two-years from the date of purchase (This guarantee is
offered to the first owner only). The care and attention offered by the Wilson Benesch dealer network matches
the quality systems that we make. Should you need further advice about cables, set-up, upgrades or any
other matters relating to the system, we would politely refer you to your local dealer.
Unpacking & Set-up Instruction
Important points before setting up:
During installation two or more people will be required as the speakers are very heavy. Never attempt to
unpack or install the speakers without assistance as this could result in damage to the product or personal
injury.
Please observe normal procedures for lifting and correct posture when handling the speakers. Soft fabric
gloves are recommended to prevent damage to the high quality finish. Also, it is strongly recommended
that all watches and jewellery be removed prior to unpacking. Patient and careful setting up is essential to
obtaining the maximum performance from this system.
Move the speaker while in the packaging to the intended listening position. For further information on
positioning, see the loudspeaker positioning section. Make sure the top of the box has been fully opened
and the hardware pack has been removed.
Particular care should be taken with the loudspeaker spikes. With the Square Five the spikes should be inserted
into the foot before the loudspeaker is placed on its foot. This is an essential step to ensure the Isotactic
Isobaric Drive System is protected. Failure to insert the spikes in this way will damage the speaker.
The protective speaker wrap can be slippery, so great care must be taken. Once both speakers have been
stood up the wrap can be removed. The packaging is essential for shipping the loudspeaker safely and it is
expensive to replace, it is highly recommended that the packaging is retained.
Wilson Benesch products are distributed by the world's finest distributors and dealers, should you have any
problems or question about the setup of your speaker please refer to your local dealer.
2
Advertisement
