Page 1
C o f f e e G r i n d e r Elektra srl - Via A. Volta, 18 - 31030 Dosson di Casier ( Treviso ) Italy - Tel. +39.0422.490.405 r.a. - Fax +39.0422.490.620 E-mail: info@elektrasrl.com - Web: www.elektrasrl.com...
CONTENTS 1.OVERVIEW 1.Overview Models Models Available in two versions: Copper and brass finish (model MS) Specifications MS Copper and Brass Features MSC Chrome 2.Grinder parts 3.Assembly Chrome finish (model MSC) 4.Making Testing the grind texture adjustments Adjusting the grind texture...
2.GRINDER PARTS 4.MAKING ADJUSTMENTS Testing the grind When the grinder is being used for Test coffee for correct flow. Hopper lid the first time, you’ll generally need The texture of the coffee grind texture to adjust the grind texture and the is tested by making a short quantity (dose) of coffee grounds black or espresso coffee...
Number of doses The following assumes the dose has been adjusted for the particular Elektra domestic espresso machine being used with the grinder. Testing the coffee Coffee dose refers to how much It’s important when adjusting...
See previous page for a guide grounds from the housing on the number of doses needed containing the grinding discs. for each type of Elektra Don’t use any water. domestic espresso machine. Clean the surface of the Tamp the grounds. Tamping...
The closer the discs, the finer the grounds. Dispensing unit Dosing lever The discs are mounted one The grinding discs in an Elektra domestic above the other, a lot closer coffee grinder than shown here Dosing chambers Details of the dispensing unit One disc is attached to an electric motor that rotates the disc.
Need help?
Do you have a question about the MS Copper and is the answer not in the manual?
Questions and answers