Indicator Description - ONV Single port 1000M Fiber Media Converter User Manual

Indicator description:

Indicator
PWR
SPD
Flashing green
FX
Flashing green
TX
Flashing green
Link
! Note
Notes: Equipment is with precision instrument built in, please take it gently to avoid severe vibration, so as not to affect the device performance. If you
find that the device is damaged or any part is lost during transport, please notify the Company or the Company's distributor, we will properly solve this
problem for you.
Indicator: Indicating the working status of power, network connection, fiber interface and electrical interface. This can help engineers to check the
working status of system and network, and then analyze field problems and facilitate monitoring.
Power jack: connected to the power adapter. Please use 48V power, otherwise the POE switch can be damaged. Built-in 100M POE switch will need
no power adapter, you can use it just by connecting to AC110V-24V/50Hz power.
Ethernet interface: Auto adapt RJ45 port, all RJ45 port support auto flip, plug-and-play. You can also check the working status by seeing the indicators.
Status
steady green
Long off
steady green
100M optical transceiver: work under 10M mode;
Long off
1000M optical transceiver work under 10/100M mode
steady green
Long off
steady green
electrical interface is transmitting or receiving data
Long off
steady green
Long off
Description
Power On, normal Supply
Power off or power fault
normal working status
correct fiber connection
fiber interface is transmitting or receiving data
wrong fiber connection
correct electrical interface connection
wrong electrical interface connection
connect to 10/100/1000M network device
fiber interface is transmitting or receiving data
no network device connected