COP Security 15-HS102TR User Manual

1x2 hdmi splitter/repeater over cat.x with local out

Advertisement

Quick Links

1x2 HDMI Splitter/Repeater
over Cat.X with Local Out
User Manual
15-HS102TR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15-HS102TR and is the answer not in the manual?

Questions and answers

Summary of Contents for COP Security 15-HS102TR

  • Page 1 1x2 HDMI Splitter/Repeater over Cat.X with Local Out User Manual 15-HS102TR...
  • Page 2: Table Of Contents

    Safety and Notice The 15-HS102TR 1x2 HDMI Splitter/Repeater over Cat.X with Local Out has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the 15-HS102TR should be used with care.
  • Page 3: Introduction

    INTRODUCTION The 15-HS102TR 1x2 HDMI Splitter/Repeater over Cat.X with Local Out allows you to distribute one of the two HDMI/DVI video sources 2 separate HDTV displays including one remotely cascade output via Cat-5/5e cost effective cable. This splitter offers the most flexible...
  • Page 4: Specifications

    SPECIFCATIONS Model Name 15-HS102TR Technical Role of usage 1x2 Distribution Amplifier Transmitter [TX] HDMI compliance HDMI Deep Color & 3D HDCP compliance Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color Transmission over UTP Full HD (1080p) –...
  • Page 5: Panel Descriptions

    7-to-0 or from F-to-8 to find the optimal visual experience. 3. HDMI Signal IN: Link to 15-HS102T or 15-HS102TR with a Cat-5/5e/6 cable. 4. Audio OUT: Plug in a local speaker here. 5. HDMI OUT: Connect to a local HDMI display with a HDMI male-male cable here.
  • Page 6: Connection Diagram

    CONNECTION DIAGRAM...
  • Page 7: Pin Definition

    PIN DEFINITION HDMI Type A (Receptacle) HDMI Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15...
  • Page 8: Notice

    NOTICE 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI or HDMI display EDID information. 2. All HDMI over Cat.X transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal Generator. 3.
  • Page 9: Warranty

    WARRANTY The SELLER warrants the 15-HS102TR 1x2 HDMI Splitter/Repeater over Cat.X with Local Out free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good...

Table of Contents