Contents Contents Manufacturer’s Certification ............1 Tested Safety ................1 FCC-Class A Declaration ............2 BSMI (EMC for Taiwan) ............2 Symbols used in this guide............3 Important Safety Precautions ...........4 Care of the BEETLE /Fusion ............5 Repairs ..................5 Overview..................6 Configurations ................6 Fusion Compact Peripherals ............8 Front view.................9 Rear View................10 Basic Operation ................11...
Page 5
Contents Clearing paper cutter jam ............23 Paper Near End Sensor Adjustment ........24 Keyboard ...................25 General...................25 Keypad ...................27 Key switch ................27 LEDs..................28 Swipecard reader (SCR) ............29 Slim DVD/ CD R/W ..............31 Appendix ...................32 Technical Data ...............32 AC Power Adapter..............33 Power Cord Selection.............34 System configuration..............35 I/O connection ports ...............37 Total Available Power of External I/O Ports ......38...
Manufacturer’s Certification Manufacturer’s Certification The device complies with the requirements of the 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive). Therefore, you will find the CE mark on the device or packaging. Tested Safety The BEETLE /Fusion has been provided with the symbol for “Tested Safety”.
Manufacturer’s Certification FCC-Class A Declaration This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Introduction Introduction This operating manual provides all the information required for the operation of BEETLE /Fusion Compact. Having studied the operating manual, you will be able to properly operate the system. Symbols used in this guide Text following this mark represents an item in a list. “...
Introduction Important Safety Precautions WARNING Please read the following notes carefully before doing any work on the device. This device complies with the relevant safety regulations for information processing equipment. Note the warning and information labels on the device. The device is equipped with a safety-tested power cable, which must be connected only to a grounded outlet.
Unauthorized opening of the device or repair work carried out improperly not only could result in considerable danger to the user but also cancel all the warranty and liability agreements. In case of noncompliance, Wincor Nixdorf International GmbH excludes all liability. 01750171533 F...
Overview Overview The Beetle /Fusion Compact system is designed for indoor installation. NOTE “BEETLE /Fusion Compact is not for office use” Configurations The configuration of the Fusion may comprise of the following components: Panel PC processor options: Intel Celeron M 1.0GHz ...
Page 13
Overview 80mm +0, -0.5mm Keyswitch, 6 positions 7 x 12 key-matrix keyboard Magnetic Swipe Reader (optional): 3-track ISO JIS (Track 1&2, JIS Type II) 01750171533 F BEETLE /Fusion Compact – Operating Manual...
Basic Operation Basic Operation The BEETLE /Fusion Compact system is easy to operate. To start operating the device, follow the steps listed below. Step 1 Connect power adapter to BEETLE /Fusion system as shown. Step 2 Switch on the main power. Step 3 Wait for the system to fully boot up before operation.
Basic Operation Switching on/off device Switch on the AC main after the power cord is plugged into the AC outlet socket. Press ON/OFF button located at the bottom right corner of the display unit to power-up the unit (see picture below). ON/OFF button button ...
Basic Operation Brightness and contrast adjustment The buttons for the brightness adjustment are located at the bottom right corner of the display unit (see picture below). Brightness adjustment buttons Press the ‘Arrow Up’ or ‘Arrow Down’ buttons to adjust the brightness until the appropriate adjustment is acceptable by the user.
Basic Operation Rotating and tilting Display The display unit can be rotated 30 to the left and 90 to the right. 01750171533 F BEETLE /Fusion Compact – Operating Manual...
Page 21
Basic Operation The display unit can be tilted between 20 to 55 01750171533 F BEETLE /Fusion Compact – Operating Manual...
Touch screen Touch screen How to Operate Touching the touch screen has the same effect as clicking the left mouse button. Depending on the selected touch screen option, the user experience with touch is different. For capacitive touch it responds to very light touch, and only touch using bare finger is possible.
Page 23
Touch Screen For Resistive Touch: The surface of your Touch Screen should be cleaned with a water-based solvent or a non-abrasive cleaner. Do not use solvents containing acetic acid or methylene chloride. Use a soft, fine-meshed cloth to clean the surface.
Printer Printer The Fusion Compact system is equipped with a thermal receipt printer. Overview Printer cover Paper output Operator panel 01750171533 F BEETLE /Fusion Compact – Operating Manual...
Printer Operator Control Panel Access cover for cutter-jam recovery OPEN FEED PAPER POWER ERROR FEED If you push this button once and release it, the printer feeds paper for one line (1/6 inch). If you push this button and hold it down, the printer feeds the paper as long as the button is not released.
Page 26
Printer PAPER Yellow PAPER LED off: Paper is properly inserted. Yellow PAPER LED on: Paper roll near end. Yellow PAPER and red ERROR on: Paper end is reached. ERROR Red ERROR LED off: normal condition Red ERROR LED on: not ready for operating. Printer cover is not closed or in combination with Yellow PAPER LED on, paper end is reached Red ERROR LED blinking: an error has occurred.
Printer Self Test Printout Terminate all applications & shut down the System. Press and hold the printer line FEED button whilst powering up the System. A service menu will be printed. Press the FEED button two times shortly to select the self test. Press the same button for more than one second to start the printout.
Printer Paper Roll Exchange For a paper roll exchange follow the steps below: Turn the display 90 degrees to the right. Open the printer cover by pressing the open button. Remove the (nearly) empty paper roll and any residual paper. ...