Advertisement
Quick Links
Quick Start Guide
T
he 11b/g Wireless SOHO Router operates seamlessly in
the 2.4 GHz frequency spectrum supporting the 802.11b
(2.4GHz, 11Mbps) and the newer, faster 802.11g
(2.4GHz, 54Mbpswireless standard. High output power and
high sensitivity can extend range and coverage to reduce the
roaming between APs to get more stability wireless connection.
It also can reduce the expense of equipment in the same
environment. To protect your wireless connectivity, this device
can encrypt all wireless transmissions through 64/128-bit WEP
data encryption and also supports WPA2/WPA/802.1x for
powerful security authentication. The MAC addresses filter lets
you select exactly which stations should have access to your
network.
Label
LAN Ports (1 – 4)
WAN Port
DC Connector
Antenna Connector
Connection / Activity
LED
WAN LED
WLAN LED
Power LED
Quick Start Guide v.1.1
Please refer to the User's Manual in the CD-ROM for complete instructions.
Use an Ethernet cable to connect each port to a computer on your Local
Area Network (LAN).
Use an Ethernet cable to connect this port to your WAN router.
Use the power cable and connect the adapter to the power socket on the
wall, and the DC inlet into the DC connector.
Connect the omni-directional antenna to the SMA connector.
This LED will light up once an Ethernet cable is connected to one of the
LAN ports.
This LED will light up once an Ethernet cable is connected to WAN
(Internet) port.
This LED will light up once the RF (wireless LAN) feature is enabled
This LED will light up once the power cable is connected to the DC
connector.
11b/g Wireless SOHO Router
11b/g Wireless SOHO Router
Description
1
Advertisement
Related Manuals for SENAO NSR-1220-QG
Summary of Contents for SENAO NSR-1220-QG
- Page 1 Quick Start Guide 11b/g Wireless SOHO Router he 11b/g Wireless SOHO Router operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless standard. High output power and high sensitivity can extend range and coverage to reduce the roaming between APs to get more stability wireless connection.
-
Page 2: Hardware Installation
Quick Start Guide 11b/g Wireless SOHO Router Hardware Installation Place the unit in an appropriate place after conducting a site survey. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook. -
Page 3: Administrator Settings
Quick Start Guide 11b/g Wireless SOHO Router Administrator Settings Before you commission the device it is necessary to change the default user name and password. Click on Password link under Management navigation menu. Specify a new user name. Specify a new password and then re- type the password in the next field for confirmation. -
Page 4: Wan Settings
Quick Start Guide 11b/g Wireless SOHO Router WAN Settings Click on the WAN Interface link on the navigation drop-down menu. This feature allows you to configure the WAN interface using a static IP, DHCP Client (dynamic IP), PPPoE, or PPTP. Follow the steps below to configure the WAN interface. -
Page 5: Wireless Settings
Quick Start Guide 11b/g Wireless SOHO Router Wireless Settings Click on the Basic Settings link under the Wireless menu on the navigation drop-down menu. These options allow you to enable/disable the wireless interface, switch between the 11b/g and 11b radio band and channel frequency Wireless Interface: Place a check in this box to disable the wireless interface, it is enabled by default.