Display Unit Only - Panasonic TC-P54Z1 Technical Manual

Display Unit Only (Tuner Box Disconnected)
When the Display Unit is connected only to the WiHD Receiver, the power can be turned ON and Off
only with the IR remote control when it's pointed at the Display Unit.
"No signal from tuner unit. Please check the connection between tuner unit and monitor" is
displayed 20 seconds after the power button is pressed.
There's no OSD shown when any of the R/C buttons or the VOL+, VOL-, CH+, or CH- buttons on the
TV are pressed.
OSD (Service Mode Menu) can be obtained when the IR remote control, combined with the VOL-
button on the TV is used to enter the Display Unit Service Mode.
Slide #14