Table of Contents
Advertisement
5. Specification
• Total RMS Power:
-Satellites:
-Subwoofer:
• Total Peak Power:
• Frequency Response:
• Drivers:
-Satellites:
-Subwoofer:
• Speaker Dimension:
-Satellites:
-Subwoofer:
6. Optimum Settings
1.
For best tonal fidelity, we recommend setting
your audio source to line level output and use
the speaker to control overall volume level.
2.
This speaker system is most efficient when the
volume level is set between 30% to 80%. You
get highest sound quality and minimum distor-
tion within these volume levels
7 Watts
1.5 Watts RMS x 2
4 Watts RMS x 1
14 Watts
30Hz to 20kHz
2-inch tweeter with solid wood enclosure
3-inch woofer with solid wood enclosure
2.68 x 4.25 x 2.76 inches
4.13 x 5.71 x 4.45 inches
3.
Place the satellite speakers at least 16 inches
from each other. This enhances stereo sound
effect and perceived sound field.
4.
Provide ample space around the subwoofer unit.
It needs enough room to move massive amount
of air! To further enhance lower frequencies,
place the subwoofer unit near walls
Advertisement
Table of Contents
