Download Print this page

MobilePower BoostPak2 Instruction Manual

Mobilepower 5 in 1 multi-purpose power source

Advertisement

Quick Links

Model No. 2019
Pak2
Boost
Instruction Manual
MobilePower, LLC. Bluffton, SC 29910
www. Mobilepower-us.com Office: (800) 708 - 8550
support@mobilepower-us.com
customerservice@mobilepower-us.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the BoostPak2 and is the answer not in the manual?

Questions and answers

Summary of Contents for MobilePower BoostPak2

  • Page 1 Model No. 2019 Pak2 Boost Instruction Manual MobilePower, LLC. Bluffton, SC 29910 www. Mobilepower-us.com Office: (800) 708 - 8550 support@mobilepower-us.com customerservice@mobilepower-us.com...
  • Page 2 Model No. 2019 Boost in 1 Multi-Purpose Power Source Stow Bar DC Plug - Vehicle Boost Start and DC Charger Power ON/OFF Toggle Switch Mode — Vehicle Start Power ON Mode (O) Power OFF Charging Indicator LED Mode Power ON 12V DC - 10A Accessory Port with Protective Cover Battery Output Voltage...
  • Page 3 To reduce the risk of electric shock, unplug the BoostPak2 AC Charger from the outlet before attempting maintenance or cleaning.  DO NOT operate the BoostPak2 if it has received a sharp blow, been dropped or otherwise damaged in any way. Call Customer Care Representative at: 1 800 708-8550 ...
  • Page 4: Specifications

    1. Keep the Power ON/OFF Toggle Switch in OFF position while charging. 2. Insert the AC charger round plug at the end of cable into the AC Charging Port of BoostPak2. 3. Connect the 110 Volt AC Charger into the 110 Volt AC home receptacle.
  • Page 5 2. Detach the BoostPak2 DC Plug by sliding it downward and away from the Stow Bar. 3. Insert the DC Plug of BoostPak2 into the vehicle cigarette lighter or 12 Volt accessory port . 4. Fully charge the BoostPak2 internal battery for 3 to 4 hours while the vehicle engine is running.
  • Page 6: Dc Plug Fuse Replacement

    1. Remove the 12 Volt DC Accessory protective cover. 2. Insert the device 12 Volt accessory plug into the 12 Volt DC Accessory Port of BoostPak2. 3. Turn on the power to the 12 Volt DC device being powered by the BoostPak2 unit.
  • Page 7: Troubleshooting Guide

    Recharge the BoostPak2 to a FULL charge status. connected to the 12 Volt output port of the Insert the device 12 Volt plug properly into the BoostPak2 DC output port does not operate. BoostPak2 Internal Circuit Breaker is OFF. Remove the 12 Volt Accessory plug from The BoostPak2 12VDC output port.
  • Page 8 Lithium ion recharg eable battery pack warranted for a period of one year. If the product is determined by MobilePower, LLC. to be defective in material and workmanship during the warranty period, MobilePower, LLC.