Using The Dtw - CEStronics OMEGA FLEX Destop Writer DTW Operating Instructions Manual

6

Using the DTW

Fig. 2 - Function principle
To use the DTW, proceed as follows:
Insert the USB plug of the DTW into a free USB port of your

PC.
The driver should be installed automatically. If not, you will
have to install the driver manually (for which you need
administrator rights at your PC):
Start the hardware recognition of your operating system

(Windows 7™ or Windows 8™) to install the driver from the
path below.
To do so, select Control Panel > Devices and Printers >

Add device.
For the hardware installation open the following file path:

C:\Programms\Omega\Driver\Mifare or
FLEX\DesktopReader\
Follow the instructions of your operating system for the

installation.
OMEGA FLEX Desktop Writer DTW
Using the DTW
Page 12 of 26