This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. IMPORTANT SAFETY INFORMATION has been exposed to rain or moisture, does not frequency energy and, if not installed and used in operate normally, or has been dropped.
• User Guide The Frame will also support a USB 2.0 or 1.1 drive. If any items are missing or damaged, contact your nearest TESCO store PICTURE FORMATS for a replacement. Have your receipt ready when you call. Retain the The DPF will play pictures conforming to the .jpg (jpeg) standard.
Locate the stand in the slot at the rear. FITTING THE STAND Rotate the stand once to put the frame into horizontal (landscape) view. Rotate once more to put the frame into vertical (portrait) view. Stand the frame on a level solid surface where it is unlikely to fall or get knocked over.
CONTROLS AND FUNCTIONS 1 SD/MMC/MS-card slot ] Down button; Rotate photo 2 USB slot while playing a slideshow 3 5V DC Input socket 8 [] Play/Pause; Confirm/Enter; hold to 4 [ ] Right/Next button enter main menu ] Up button; Back to preview while 9 On/Off switch playing a slideshow 10 Stand...
If the DPF is being switched on for the first time, or after a default GETTING STARTED setting reset, you must first select a display language. Use the CONNECTING THE POWER SUPPLY ) or ( ) buttons to make your selection and press the () button to confirm.
Page 7
INSTALLING A USB DEVICE OR MEMORY CARD When first switched on the pictures will display as a Slide Show. To insert a memory card. Position the card with the cropped corner Thereafter the display will depend on the setup you have customised. facing down and press gently in.
VIEWING PHOTOS Main menu 2 Use the ( ) or ( ) buttons to navigate between the options In the main menu, you can select the connected memory device to view in the main menu. Press the () button to confirm or enter the photos, change frame settings, or play the photos immediately.
Playing a slideshow NOTE: There are two ways of playing a slideshow: • If there are memory devices inserted in the DPF before it is 1 Press the ( ) or ( ) buttons to select a memory device (USB switched on, the frame will automatically start to play a slideshow.
3 To view a selected thumbnail, press the () button. • To rotate a photo, highlight ( ) and press the () button Note: repeatedly. • Hold the ( ) button to return to the main menu. • To return to thumbnail mode, highlight ( ) and press the () Changing Frame Settings button.
Setting items Setting Items Description Setting Items Description Hint time Set how long to display the button Language Set the display language of the DPF. operation window while in slideshow mode. The available options are: 0s, 5s, Slideshow Time Set the interval time for slideshow 15s, 20s.
Please recycle where in no way affects your consumer rights. facilities exist. Check with your Local Authority Slide show mode stops this from occurring. or retailer for recycling advice. Tesco Stores Ltd, Delamare Road, Cheshunt, Herts, EN8 9SL...
Need help?
Do you have a question about the T70 and is the answer not in the manual?
Questions and answers