1. Manuals
  2. Brands
  3. Weaver Manuals
  4. Toy
  5. Baldwin VO1000
  6. Owner's manual

Weaver Baldwin VO1000 Owner's Manual

Diesel locomotive
Hide thumbs
Table of Contents

Advertisement

Quick Links

PO BOX 231 ~ 315 Point Township Drive ~ NORTHUMBERLAND, PA 17857
Web Site: www.weavermodels.com ~ E-mail: customerservice@weavermodels.com
Baldwin VO1000 Owner's Manual
Thank you for purchasing this new Baldwin VO1000 Diesel
locomotive. Our 1/4" scale reproductions are highly detailed and designed
for years of operation on your O Scale pike. Weaver locomotives are
completely compatible with most other O Scale engines, rolling stock, and
accessories. Please note that this manual is for a variety of Weaver diesel
locomotives. Refer to this manual for information about all Weaver Baldwin
VO1000 locomotives.
All Weaver diesel locomotives are tested and greased before
leaving the factory and are ready-to-run on your layout.
Maintaining Your Engine:
As with all our Weaver engines, this locomotive is designed so that
very little maintenance is required from the owner. It is recommended that
all moving parts (idler gears and axles) be oiled after 25 hours of operation.
The locomotive is comprised of two precision can motors and two drive
trucks whose outside idler gears should be lubricated with household oil to
prevent squeaks and enhance performance. A drop or two of oil on gears
1 Maintaining Your Engine
PHONE: 570-473-9434 FAX: 570-473-3293

Table Of Contents

11 Warranty Registration Card
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Baldwin VO1000 and is the answer not in the manual?

Questions and answers

Related Manuals for Weaver Baldwin VO1000

Summary of Contents for Weaver Baldwin VO1000

  • Page 1: Table Of Contents

    O Scale pike. Weaver locomotives are completely compatible with most other O Scale engines, rolling stock, and accessories. Please note that this manual is for a variety of Weaver diesel locomotives. Refer to this manual for information about all Weaver Baldwin VO1000 locomotives.

  • Page 2: Traction Tires

    and pick up rollers should be sufficient. Traction Tires Each powered truck of your locomotive has a set of drive wheels that is fitted with traction tires. These traction tires provide for maximum pulling capability of your locomotive. Operating Instructions For EOB Cruise Control Engineer On Board Cruise Control is a very complex circuit.
  • Page 3 For the 128-speed step mode; ENG + ## + DIR + AUX1 + AUX1 + AUX1 + 2 (The horn will sound after the 3rd AUX1 and after 2.) The 128-speed step mode works quite differently than any other locomotive control system. This is because the Lionel radio board (R2LC) is fixed at a constant 32 speed steps.

  • Page 4: 3-Rail Without Sound (Non-Command Mode)

    The sequence of operation is neutral-forward-neutral-reverse. All 3-Rail without sound engines can be upgraded to RailSounds® and TrainMaster® Command Control. Weaver Models also offers Rail Waves as a sound option which includes a diesel horn and bell sound. Contact us today to upgrade your engine.

  • Page 5: 3-Rail With Sound (Non Command Mode)

    3-Rail With Sound (non command mode) This engine is equipped with RailSounds® and is also TrainMaster® Command Control ready. This diesel features digital samples from authentic diesels for the ultimate in realism. An engine running in a non command mode will have diesel idle sounds, and also diesel horn and bell. Also, listen for incidental locomotive sounds during RailSounds®...

  • Page 6: Trainmaster® Command Operations

    truck. All four switches thrown in one direction gives access to TrainMaster® Command and RailSounds® operation. All the switches thrown in the opposite direction is for operation on conventional DC. For TrainMaster® Command Control operations refer to the sections on pages 3-6 of this manual.

  • Page 7: Cab-1 Remote Controller® Commands

    CAB-1 Remote Controller® Commands Press WSTL/HRN to activate Press AUX1 to activate numeric horn. Release it to discontinue. keypad Press BELL once to activate Press AUX2 to turn headlight on the bell, again to discontinue. and off Press DIR - the locomotive Couple F/R buttons will release decelerates to a complete stop;...

  • Page 8: Turning Your Locomotive's Performance Momentum

    6 Lowers RailSounds® RPM level. 7 TowerCom™ is an audible announcement from the tower. 8 Turns the smoke unit off (only diesels with smoke). 9 Turns the smoke unit on (only diesels with smoke). Turning Your Locomotive's Performance Momentum TrainMaster® Command's momentum feature simulates the labored performance of a locomotive pulling a heavy load.

  • Page 9: Reprogramming Lcru Circuit Boards To Restore Features

    1. First: WRITE, CALL, FAX or E-MAIL Weaver Models, PO Box 231, 315 Point Township Drive, Northumberland, PA 17857, 570-473-9434 (FAX Page 9...
  • Page 10 MUST be included to facilitate the repairs. Please include the description regardless of whether you discussed the problem with one of our service technicians when contacting Weaver Models. 3. Please make sure you have followed the instructions carefully before returning any merchandise for service.

Table of Contents