Advertisement
Quick Start Guide
Step 2: Connect Ethernet
Connect Ethernet Cable
Plug one end of the Ethernet cable into the
LAN port on the rear of your Cloud Appliance
and the other end into a network port on your
Ethernet switch or router.
Step 3: Connect Power
Connect Power Adapter
Plug the power cord into the power jack on the
rear of your Cloud Appliance and into a nearby
power outlet.
Step 4: Power Up the Appliance
The Cloud Appliance should power on automatically. If not,
press the power button on the back. The LED turns steady
green when the Appliance is ready.
• Note that the Power On Self-Test may take up to 5 minutes.
Step 5: Connect to the Web Interface
On Windows Vista: Click Start > Network
On Windows XP: Click Start > My Network Places
Double-click on the Cloud Appliance icon
DURACELL CLOUD STORAGE | QUICK START GUIDE
Quick Start Guide
Prior to receiving your DuracellCloud DC202
appliance a new account was created for you at:
backup.duracellcloud.com
Your username is: John Smith (First and Last name)
Password: password (case sensitive)
To access the portal from any location go to:
backup.duracellcloud.com
Cloud Storage
After logging in you can access the
"Cloud
this is where you can create folders and manually upload data to the cloud.
To create a new folder to back up your data double click on my files. Click
on the drop down menu titled "Actions" to make a new folder.
Drive" by selecting the tab below,
DURACELL CLOUD STORAGE | QUICK START GUIDE
Advertisement
