UNIQUE GLOBAL SOLUTIONS 259-5015 Assembly Instructions

Outdoor fire pit

Advertisement

UNIQUE GLOBAL SOLUTIONS
ITEM # 259-5015

ASSEMBLY INSTRUCTIONS

WARNINGS:

This fire pit is intended for outdoor use only. Do not use on wooden decks.
This fire pit is intended to burn wood logs only. Do not burn coal, leaves, or
other combustible materials in the bowl.
Not for use by children. Keep children and pets away from this fire pit.
The fire pit is hot. Use with caution. Do not touch the hot fire pit with bare hands.
Never leave the burning fire pit unattended, and always extinguish the fire
completely before leaving the fire bowl.
Do not use near flammable or combustible objects or materials.
When the fire pit is in use, the handle on the mesh screen can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker
or an appropriate heat resistant glove or pad when handling.
DO NOT use this fire pit as a cooking appliance. This fire pit is not designed for
grilling food.
Check local fire regulations and municipal by-laws for safe use.
Read all safety guidelines, warnings, instructions, and operating rules carefully
before assembling and using this product.
Some parts may contain sharp edges – especially as noted in the manual. Wear
protective gloves if necessary.
No.
Parts.
A
Lift handle
B
Mesh cover
C
Log grate
D
Firel bowl
E
Holder
F
Leg
G
Decor frame
H
Poker
No.
Hardware
AA
Bolt M6X40
BB
Bolt M6X10
Nut
CC
(preassemble on
part A )
OUTDOOR FIRE PIT
Qty.
1
1
1
1
2
2
2
1
Qty.
4
8
M6
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 259-5015 and is the answer not in the manual?

Questions and answers

Summary of Contents for UNIQUE GLOBAL SOLUTIONS 259-5015

  • Page 1: Assembly Instructions

    UNIQUE GLOBAL SOLUTIONS ITEM # 259-5015 OUTDOOR FIRE PIT ASSEMBLY INSTRUCTIONS WARNINGS:  This fire pit is intended for outdoor use only. Do not use on wooden decks.  This fire pit is intended to burn wood logs only. Do not burn coal, leaves, or other combustible materials in the bowl.
  • Page 2 Step 1: Attach the Lift handle (A) and Mesh cover (B) by using Nut M6 (CC).(as fig1) Step 2: Attach the Holder (E) and Leg (F) by using Bolts M6x 40 (AA). Do the same job to another. (as fig2) Step 3: Attach the result of Step 2 and Decor frame (GG) by using Bolts M6x10 (BB).
  • Page 3 CALL TOLL FREE 888-779-5030 FOR REPLACEMENT PARTS, QUESTIONS OR CUSTOMER SERVICE BEFORE RETURNING PRODUCT TO STORE. PLEASE HAVE RECEIPT, DATE PURCHASED AND LOCATION READILY AVAILABLE WHEN YOU CALL FOR ASSISTANCE, WE WILL BE HAPPY TO ASSIST YOU. Customer Service Unique Global Solutions...

Table of Contents