Enabling Devices 561 User Manual

Troubleshooting:
Problem: The unit fails to operate, or operates incorrectly.
Action #1: Check your batteries – There is a 99% chance that either one is
Wireless Switch Adapter - #561
installed incorrectly and/or one is weak/dead. Use alkaline type batteries only.
Action #2: Disconnect the power by removing one of the batteries for 20
seconds in order to reset the unit. Re-install the batteries. If the unit does not
work correctly, replace all the batteries paying careful attention to proper
polarity.
Action #3: Make sure that you have tight connections between switch, device
and cord. There should be no gaps.
Action #1: Check your batteries – There is a 99% chance that either one is
installed incorrectly and/or one is weak/dead.
Care of the Unit:
The Wireless Switch Adapter can be wiped clean with any household multi-
USER'S GUIDE
purpose, non-abrasive cleaner and disinfectant.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
50 Broadway
For Technical Support:
Hawthorne, NY 10532
Call our Technical Service Department
Tel. 914.747.3070 / Fax 914.747.3480
Monday through Friday, 9 a.m. to 5 p.m. (EST)
Toll Free 800.832.8697
1-800-TEC-TOYS or 1-800-832-8697
www.enablingdevices.com
customer_support@enablingdevices.com