Ubiquiti airMAX AM-5G19-120 Quick Start Manual page 9

9. To mount the antenna to the pole, attach the Pole Clamps to
the lower and upper Pole Brackets in the following steps:
Note:
Ø 1.5" - 3.0" pole.
a. Slide the Pole Clamp over the two M8x135 Carriage Bolts
of the lower Pole Bracket. Secure it with two M8 Serrated
Flange Nuts.
M8x20 Serrated Flange Bolt
Pole
Bracket
M8x20 Serrated Flange Bolt
The mounting assembly can accommodate a
Lower Bracket Connection Overview
Hardware Installation
M8 Serrated
Flange Nut
M8x135
Pole
Carriage Bolts
Clamp
M8 Serrated
Flange Nut
7