PureEffect ULTRA-WHW Installation Instructions

Thank you, and Congratulations on your purchase of The PureEffect
Well Water Filtration System Featuring our: WellGuard
(please become familiar with instructions before installing).
_____________________________________________________________________________
- CAUTION!! Improper Installation can cause Property Damage, all installation must be done by a licensed and
experienced plumber in compliance with local plumbing and sanitation laws.
- Do not use with water pressure more than
common PSI ranges are between 40-75). Ensure there is a pressure regulator installed and is in proper working
order before proceeding. PureEffectFilters.com assumes no liability for any damage or losses due to excessive
water pressure or improper installation/use. If Hanging on the wall:
place anything of value under the system.
- The system should be installed Indoors and where it is protected from freezing temperatures and direct
sunlight.
- Do not use with water that has not been adequately disinfected, of unknown quality or is not approved for
drinking. By installing/using this system, you agree to hold PureEffectFilters.com (Survive & Prosper, Inc.) and
all it's owners, agents and employees harmless of any liability, damages and/or losses as a consequence of
improper use/installation, or unforeseen circumstances out of our control (e.g. acts of nature).
_____________________________________________________________________________
Housing Caps "
Wide-Spectrum Anti-Radiation Technologies.

INSTALLATION INSTRUCTIONS

IMPORTANT! - BEFORE YOU START:

90PSI.
TM
TM
Well Contaminant Removal & AntiRad-WH
Booster pump may be installed if less than 40PSI.
As a safety precaution: never stand or
Pressure Gauge
! Wall-Mount Bracket
Gauge
! 20" Housing
1
Customer Support:
Tel: 1-347-492-4014
Email: info@pureeffectfilters.com
www.PureEffectFilters.com
ULTRA-WHW Whole-House
! Shut-Off Ball Valve
(Water–In)
TM
(Most