Page 1
1. Insert product CD into your optical disk drive & open Setup file (EPI-3601Sxxxx.exe) 2. Restart your PC as instructed by SETUP. 3. Insert EPI-3601S in one of your available PCI slot in your PC. 4. Check if EPI-3601S is installed correctly in your PC/Notebook.
Page 2
2. If you CANNOT, you will have to connect to a Wireless Network manually. Using EnGenius Client Utility Configuration 1. Open the EnGenius Client Utility and select Profile Management. 2. Press Scan to find the networks available. Click Activate to connect to that SSID.