Subscribe to Our Youtube Channel
Summary of Contents for Lightwave LW103 Connect Series
- Page 1 Version 2.1 Socket Locker Model No. LW103 Instruction Manual Connect Series www.lightwaverf.house...
- Page 2 EC DECLARATION OF CONFORMITY Responsible Authority: LightwaveRF PLC, Innovation Campus Birmingham Faraday Wharf Holt Street Birmingham B7 4BB Tel: +44 (0)121 250 3625 Email: enquiries@lightwaverf.com Model Number(s): JSJSLW103 Description: Socket Locker Directives this equipment Complies with: 2006/95/EC The Low Voltage Directive N/A 2004/108/EEC The Electromagnetic Compatibility Directive 1999/5/EC R&TTE Directive 93/68/EEC CE Marking Directive...
-
Page 3: How Do I Get Started
Get Started How do I get started? Refer to the setup guide on the following pages to get going. This will guide you through the setup process and explain how to link the Socket Locker to your LightwaveRF devices. How does it work? The Socket Locker will allow you to ‘lock’... -
Page 4: Device Setup
Device setup Overview Double lock On button. button. Lock button. button. Unlock button. IMPORTANT: Please retain these instructions for guidance on how to link remote handsets and other LightwaveRF controllers. For additional guidance please visit the support section on www.lightwaverf.com... - Page 5 Plug-ins) which means they can link with up to 6 LightwaveRF controllers in total. NOTE: If you are using a smartphone/tablet/PC to control the socket via the Lightwave Link, this will always count as ONE controller and take up one memory slot even if you are using multiple smartphones/tablets.
- Page 6 Device setup NOTE: Linking mode lasts for 12 seconds; if no signal is received from a remote handset during this time, then the socket will automatically exit learning mode without linking to the handset. If, when expecting a quick flashing blue LED to confirm pairing, a slow amber flash is received instead, then the socket memory is full, and no further remotes may be linked with it unless one of the existing remotes is unpaired first (see below).
- Page 7 NOTE: Reliable range of operation is around 15 metres indoors and up to 100m outdoors using the Lightwave Link. This figure may vary depending upon the environment; very thick walls, bodies of water or large metal objects may interfere with radio range.
-
Page 8: Remote Operation
Remote operation Locking the socket • The Socket Locker is designed to ‘lock’ LightwaveRF devices so that pressing the manual buttons will not operate them. This can also be achieved using the LightwaveRF App. If it is locked on, then a LightwaveRF socket, relay or plug-in will not turn o manually. - Page 9 Remote operation IMPORTANT: If the Socket Locker is misplaced, locked sockets can be reset by turning of mains power to the circuit for a period of 30 seconds. NOTE: You can also lock other LightwaveRF devices such plug-ins and relays using the Socket Locker.
- Page 10 find a way of carrying on. With Lightwave you can make sure that when you say it’s time, it really is time. If the gaming console or television is plugged into a LightwaveRF socket, you can use a Socket Locker to lock them so that they cannot be turned back on.
- Page 11 Dangerous appliances in the kitchen (blender, microwave, hot plate, etc.) might be a worry if you’re not always around to supervise the family. With the Lightwave Link, you can control the sockets from anywhere using your smartphone. This means that you can lock dangerous devices when you’re on...
-
Page 12: Troubleshooting
Troubleshooting Problem: The Socket Locker will not operate the dimmer / socket. Solution: The Socket Locker may be encountering interference or may be at the edge of its reliable range of operation. First, ensure that there are no large pieces of metal or bodies of water in the path of the transmission. If the problem persists, try moving closer to the device, or consider using a LightwaveRF Signal Booster to extend the range by relaying the signal between Socket Locker and target device. -
Page 13: Specification
Technical Specification Specification RF frequency: 433.92 MHz Input rating: 3V (battery) Warranty: 2 year standard warranty... - Page 14 Version 2.1 2 Quadrant Park Mundells Welwyn Garden City Herts AL7 1FS 01707 386035 www.lightwaverf.house...
Need help?
Do you have a question about the LW103 Connect Series and is the answer not in the manual?
Questions and answers