T28/T29 series weighing scales user’s manual SECTION 1 INTRODUCTION The T28/T29 series of weighing/waterproof scales provides an accurate, fast and versatile series of general purpose waterproof weighing scales. There are 4 models of scales within the range. Platform size is 190mm x 230mm, capacity range from 3kg to 15kg.
Do not stack material on the scales when they are not in use. 3.2 INSTALLATION of T28/T29 SERIES T28/T29 series waterproof scales use AC adapter and rechargeable battery powered. Please attention the power source voltage accord with the mark of the adapter.
T28/T29 series weighing scales user’s manual SECTION 4 KEY DESCRIPTIONS ON/OFF: turn on the power TARE/UNIT:press this key to tare, hold this key for 4 seconds to change weighing unit ZERO:rezero the scale. - 4 -...
T28/T29 series weighing scales user’s manual SECTION 5 DISPLAYS The LCD display will show a value and some marks under the digits. Zero: zero indicator Stable: Stability indicator Net: Tare indicator, current scales in net weight mode Bat. Lo: Low battery indicator, charging the battery at once when this indicator on...
T28/T29 series weighing scales user’s manual SECTION 6 OPERATION 6.1 Zeroing The Display You can press the ZERO key at any time to set the zero point from which all other weighing, within 2% of power up zero. This will usually only be necessary when the platform is empty.
ZERO key to select calibrate weight, after you select, press TARE/UNIT key, display shows “LOAD”, put the calibrate weight on, after STABLE indicator on, press ZERO key to sure, display shows “SUCC”, after T28/T29 selfchecking again, T28/T29 is ready for you.
T28/T29 series weighing scales user’s manual 7.8 Change capacity Before this operate, please short K4 After enter setting mode, display shows “F0 CAL”, press ZERO key six times, display shows “F6 CAP”, press TARE key, display show “pin---“, waiting for input password, press TARE key and ZERO key to input password (TARE key for increase value, ZERO key for move active digit), default password is “315”, after input correct...
T28/T29 series weighing scales user’s manual SECTION 8 BATTERY OPERATION The weighing indicator can be operated from the battery if desired. The battery life is approximately 100 hours. (without backlight) When the battery needs charging BAT LO indicator will turn on. The battery should be charged when the symbol is on.
T28/T29 series weighing scales user’s manual SECTION 9 ERROR CODES ERROR DESCRIPTION RESOLUTION CODES - -OL - Over range Remove weight from the scale. If the problem persist contact your dealer or Taiwan scale for assistance. Err 4 Zero Setting Error...
Page 15
T28/T29 series weighing scales user’s manual TAIWAN SCALE is a international supplier with more than 30 years experience in the production and sale of electronic weighing equipment. Products are supplied and serviced from our company locations in the CHINA, TAIWAN and distributed through a world wide dealer network, also we make OEM/ODM products for world wide customer.
Page 16
T28/T29 series weighing scales user’s manual W & P Scales Mfg. (Kunshan) Co., Ltd. Taiwan Scale Mfg. Co., Ltd. No. 99 Shunchang Road 282, Sec.3, Hoping W. Rd. Kunshan Fuxi industry park Taipei, Kunshan, Jiangsu Taiwan China TEL:886-02-23068203 TEL:86-512-57669080 FAX:886-02-23044354 FAX:86-512-87669500 e-mail: tscale@giga.net.tw...