Advertisement
Configuration
Menu
Function
Record Mode
Start the recording on setting
Playback
Display REC list
REC Mode Setting
Set REC Mode
Video Quality
REC Video Quality
REC Time
Set Normal REC Time
Set REC Channel
REC CH
Motion Sensitivity
Set Motion Sensitivity
REC
Setting
Set 3D Sensor Sensitivity
G-Sensor Sensitivity
Voice Guide Volume
Set Voice Guide Volume Level
Set REC Volume
REC Volume
SD Card Adjustment
Set SD Car Capacity Rate by mode
Set Auto Change to Parking mode
Parking Mode Change
LED Operating Guide
Item
CH
Front LED
Booting
-
ON
FW update
-
OFF
1CH
Normal, Event,
Lighting ON / OFF
REC Stanby
interval at 1 sec
2CH
1CH
In detect a shock
Lighting ON / OFF
(Event REC)
interval at 0.5 sec
2CH
Cross flashing 3LEDs rightleft
1CH
Parking REC
interval at 0.5 sec
Stanby
2CH
(1, 2, 3, 3, 2, 1, ...)
1CH
Parking REC
Lighting ON / OFF
(Motion, Event)
interval at 0.25 sec
2CH
1CH
Menu
OFF
2CH
No SD Card
-
OFF
(Including other error)
High temperature
-
OFF
Cut off
※ Even though GPS signal dose not connect depends on GPS situation and location, GPS LED turn on Red lighting.
Menu
Function
Set Breaking Voltage
Breaking Voltage
Set front camera sensor
Front Camera Setting
Set LCD Screen Save Time
LCD Screen Saver
Set TV output
TV-Out
System
Set Video output on LCD
LCD Setting
Set OSD output on LCD
OSD Setting
Set Security LED
Front LED Setting
Shutdown by Temp
Set High Temperature Shutdown Function
Time setting
Set Time
Time
Set Standard Time
Standard Time
Set Summer Time
Summer Time
FW Update
FW Upgrade Function
SD Card format
SD Card Format Function
Other
LCD Touch Screen Calibration
Touch Calibration
Configuration Initialization
Initialize Configuration
System Information
Display System Information
PWR LED
MIC LED
GPS LED
Red lighting ON
Orange lighting ON
Red lighting ON / OFF
interval at 1.5 sec
Green lighting ON / OFF
interval at 1.5 sec
Red lighting ON / OFF
interval at 0.5 sec
Green lighting ON / OFF
interval at 0.5 sec
Red lighting
Red/Green flashing
ON/OFF based on
NOT Receiving OFF
interval at 1.5 sec
audio REC setting
Receiving ON
Red/Green flashing
interval at 0.5 sec
Red lighting ON
Green lighting ON
Red flashing interval at 0.5 sec
Red/Green flashing interval at 0.5 sec
Product Parts
SD Card slot
To set vehicle constant power discharge protection function
This device has the built-in vehicle constant power
discharge protection function, and therefore does
not require an extra device to cut off constant power.
With the configuration on LCD or PC Viewer program,
you can set the Cut Off Voltage for the
constant-power-off function.
Micro SD Card Format
1. On PC
Connect a SD card
to your PC, and click
on'My Computer'
User manual and viewer program are stored on packaged Micro SD card, please note all data will be
deleted if you format a Micro SD card.
Please backup user manual and viewer program on your computer before you format a Micro SD Card.
Please set FAT32 for file system when you format a Micro SD Card.
If you format as NTFS or another format, Micro SD card will not be recognized and product can not work
correctly. We recommend allocated value 32KB when you format a Micro SD Card.
2. Format on BRAVO
Format a Micro SD Card on a device. (Menu > Others > SD Card Format)
GPS
Firmware Upgrade
Auto Firmware Upgrade
1) Remove a Micro SD card from the device while Power is off.
2) Connect it to PC to back up the stored REC files onto PC.
3) Format a Micro SD card.
4) Go to the web site (http://www.winycam-eng.com) and download
a new firmware onto the memory card.
5) Insert a Micro SD memory card into the device, turn on a power and
a automatic upgrade will begin.
6) During the upgrade, the upgrade status will be shown on a LCD and
voice guidance will be announced.
7) Once upgrade completed, the device will be initialized and voice
guidance will be announced.
Power LEC
Front Camera
MIC LED
GPS LED
MIC
Security LED
TV-OUT
Rear Camera Connection
1) Configuration
Menu > System > Cut off voltage
2) PC Viewer Program
Configuration > Breaking Voltage
There are some differences depend on a type of vehicle and
vehicle age.
(Breaking Voltage : 11.8V, 11.9V, 12.0V, 12.1V, 12.2V, OFF)
Right-click'Removable
Disc'and select on
'Format'from the menu.
Manufacture : 303-305, Bucheon Technopark,
#365, Samjeong-dong, Ojeong-gu, Bucheon-si,
Gyeonggi-do , Korea 421-741
Please download the user manual, program from
below website
http://www.winycam-eng.com
REC Button
by manual
Reset
GPS Connection
Power Connection
Set Allocated value as 32KB
and press "Start" to format.
Customer Service
Winy Technology Co., Ltd
Advertisement
